MTX THUNDER FORM F-150C-09 Installation Manual

F-150C-09 Installation Guide
Ford 150 Crew Cab 2009 - UP
(Loaded/Amplified)
STEP 1:
Flip up the driver side rear seat and place the enclosure on
the floor as shown above. The enclosure should be even
with the edge of the seat when the seat is in the lowered
position.
STEP 3:
From the passerger side, attach the second bracket to the
enclosure as shown. Use the same screws from Step 2.
STEP 2:
Attach the mounting bracket to the enclosure as shown
using (2) 2" screws to attach the bracket to the floor, and (1)
M6 bolt to attach the bracket to the enclosure.
STEP 4:
Make all final wire connections (See Page 2) and fold the
seat down. Your installation is complete. Enjoy your new
bass in a small space.