MTX THUNDER FORM J-WRANGLER-07 Installation Manual

J-WRANGLER-07 Installation Guide
Jeep Wrangler 4 Door JK Series (Drivers Side) 2007 - UP
(Loaded/Amplified)
STEP 1:
Locate the rooftop mounting bolts as shown (driver side,
behind the rear seat above the wheel well). Note: Enclosure
does not fit convertible version.
STEP 3:
When the bracket is assembled to the enclosure, this is
how the bracket mounts to the vehicle.
This is for reference only!
STEP 5:
Your installation is complete. Enjoy your new bass in a small
space.
STEP 2:
Attach the mounting bracket to the enclosure as shown
using the supplied hardware.
STEP 4:
Make all final wire connections (See Page 2), and mount
the enclosure into place using the bolts removed from the
rooftop mounting location in Step 1.