Preparing E220; Installation Instructions - Huawei E220 Quick Manual

Note:
Improper configuration may degrade the
computer performance.
For Windows XP, it is recommended to
install patches such as Service Pack 2 or
above.
For Windows 2000, it is recommended to
install patches such as Service Pack 4 or
above.

Preparing E220

1)
Remove the UMTS subscriber identity
module/subscriber identity module
(USIM/SIM) card slot from the E220.
Then insert the USIM/SIM card into the
card slot, as shown in the following
figure. Make sure that the USIM/SIM
card is fully in place.
2)
Insert the card slot into the E220, as
shown in the following figure.

Installation Instructions

The installation procedures of the E220
Manager vary with operating systems (OSs).
Refer to the actual installation instructions
during the installation process.
1. Connecting the E220 with
a Computer
Note: First, power on a computer. Then
connect the E220 with the computer.
Otherwise, the normal installation of the
E220 can be affected.
The following figure is the sketch map of the
data cable.
Auxiliary USB
data cable
2
Mini-USB
Mini-USB
data cable connector