1 Introduction CK106 is a rescue device with voice function.It works on LTE B2/B4/B5/B12/B13 network with superior receiving sensitivity. Based on the embedded wireless tracking protocol, CK106 can communicate with the backend server through LTE network, and transfer emergency reports.
2.2 LED Description To be added Figure 1-2 There are 2LED lights in CK106 device, the description as following. Light Event State Steady light Red LED Power on/Fully charged Slow flash charging Steady light Blue LED Power on fast flash...
Tail patch cord Charging for the device 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. The Battery in device is a backup battery in power off mode. Main power is from automobile battery through tail patch cord. Charging will last about 4 hours.
Power on: If the Rescue device is firstly used , install the automobile battery to tail patch cord. Power off: Rescue device is auto power off and user can’t turn off the machine by itself. 4 Frequency LTE:Band2、Band4、Band5、Band12、Band13 WIFI:2.4GHz GPS:1575.42MHz、1176.45 MHz 5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble...
5.2 Safety info The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion.
Page 8
ISED RSS Warning: This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: ( 1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the CK106 and is the answer not in the manual?
Questions and answers