Related Manuals for Micron Prime At Lite
Summary of Contents for Micron Prime At Lite
-
Page 1: User Manual
GSM/GPRS/GPS Tracker Prime At Lite User Manual Revision: 1.03 Document Title Prime At Lite User manual Version 1.03 Finale Date 2011-09-14 Status Released Document Control ID TRACKER Prime At Lite... -
Page 2: Table Of Contents
2.4.2 External Battery Interface ..................6 3 Getting Started ..........................7 3.1 Parts List ..........................7 3.2 Battery Charging .........................7 3.3 Prime At Lite Data Cable ....................8 3.4 How to insert SIM Card ......................8 3.5 Power on/Power off......................9 4 Trouble shooting and Safety info ....................10 4.1 Trouble shooting .......................10... -
Page 3: Introduction
1 Introduction Prime At Lite is a powerful GPS locator which is designed for vehicle, pets and assets tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/900/1800/1900. Its location can be real time or schedule tracked by backend server or specified terminals. Based on... -
Page 4: Led Description
SOS mode (default) Long press the key to active SOS alarm Mini USB Connect a 5V DC adapter can power on Prime At Lite and charge the internal interface battery Connect a 3.7V Li-ion or Li-Polymer battery can power on Prime At Lite... -
Page 5: External Power Interface
2.4.1 External DC Charger Interface The Pin2 on Mini-USB connector is used for charging and named as VCHG pin, which can be connected to 5V DC power source to power on Prime At Lite device and charge the current battery. -
Page 6: External Battery Interface
The Pin 8 and Pin9 on Mini-USB connector are used for external battery and named as EXTBAT pin, which can be connected to 3.7V Li-ion or Li-Polymer battery to power on Prime At Lite device. The Pin6 on Mini-USB connector is used for external battery interrupt detection and named as EXT_VBAT INT, which must be connected to GND for EXT_VBAT detection. -
Page 7: Getting Started
You can also charge the battery using USB cable which connects Prime At Lite device with the PC. Charging will last about 5 hours. Note: If the Prime At Lite device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer. -
Page 8: Prime At Lite Data Cable
3.3 Prime At Lite Data Cable Prime At Lite Data Cable is a cable with a Mini USB connector. The USB data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time. -
Page 9: Power On/Power Off
Step3: push the cover back. 3.5 Power on/Power off Figure 2-3 Power on: Press the Power key at least 3 seconds and release it to power on Prime At Lite device. Note that, the will fast flash. Power LED light Power off: Press the power key about 3 seconds;... -
Page 10: Trouble Shooting And Safety Info
Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use Prime At Lite on the airplane or near medical equipment. - Page 11 FCC RF Exposure Information and Statement The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types AT Lite (FCC ID: Z24-ATL) has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification when properly worn on the body is 0.770W/kg.
Need help?
Do you have a question about the Prime At Lite and is the answer not in the manual?
Questions and answers