Outdoor sensor (use with th8000 and th7000 thermostats) (12 pages)
Summary of Contents for Honeywell onecal
Page 1
Operation and Service Manual Electronic + Temperature Sensor Intrinsically Safe Digital Thermometer Note: before using the instrument please read this book. This document is subject to changes without notice. Check updates on www.tanksystem.com or contact us at tanksystem@honeywell.com 50449/onecal/1001 onecal...
Consequently, the instrument may incorporate minor changes in detail from the information Abuse including rough handling, mechanical contained in the manual. damage, electrical damage, operation, alteration, or unauthorised repair or component replacement by the Purchaser will void this guarantee and may 50449/onecal/1001 onecal...
Class I, Zone 0, AEx ia IIB T4 customers expense. Contaminated equipment will not be repaired until such time that the customer decontaminates the said equipment. Japan: TIIS (ia) IIBT4 Poland: KDB EExiaIIBT4 Russia: GOSGORTECHNADZOR 0ExiaIIBT4X 50449/onecal/1001 onecal...
Serial number: ...O........Year:.......... Short description of trouble: ................................................................................... Do you want a quotation before repair is started:..yes / no..... Repaired unit has to be returned to the following address: ...................................................................... For the Attention Of: ........................50449/onecal/1001 onecal...
9. This product and his use is / may be related to international, national, local or company regulations or standards. It is the customer / user responsibility to ensure that the way to use the device complies with such applicable regulations or standards. 50449/onecal/1001 onecal...
5.1.3 High standard in accuracy, repeatability and reproducibility The onecal thermometer is specifically designed to meet the highest accuracy standards (ISO 4268, API Manual of Petroleum Measurement Standards Chapter 7) that are commonly accepted best oil industry practice.
Page 10
Figure 1 shows the main features of the Figure 1 50449/onecal/1001 onecal...
A special extra load (300 g) can be provided as an option, in case very viscous liquids are measured. It is very easy to install. Two screws (Allen key 2 mm) secure it on the sensor . Figure 2 50449/onecal/1001 onecal...
By pressing the 5-key control pad the user can select the temperature scale, the operating mode, and store up to 9 temperature measurements, or calculate the average temperature on selected data. See also section The approved batteries are: Zinc Carbon or Zinc Chloride: 6F22 or 6F22P Alkaline Manganese: 6LR61, Duracell MN1604/ Procell PC1604 50449/onecal/1001 onecal...
(1) Unscrew the 2 screws of the battery cover located at the rear face of the electronic box. (2) Check that the battery is approved, i.e. Duracell MN1604/ Procell PC1604 or any 6F22 or 6F22P. (3) insert the battery. (4) Put the cover back and tighten the screws. Figure 3 50449/onecal/1001 onecal...
Press "on". The following sequence is displayed automatically. is now ready for measuring the temperature, that is displayed and refreshed every second. 6.6 Automatic shut off If there is no action on the keyboard during 10 minutes the thermometer switches off automatically. 50449/onecal/1001 onecal...
Temperature °C or °F: when "Temp" is displayed press "enter", then "+" to chose the scale. Press "-" 3 times to return to the measurement mode. Resolution 0.1° ou 0.01°: when " displ" is displayed press "enter", then "+" to chose the resolution. Press "-" 3 times to return to the measurement mode. 50449/onecal/1001 onecal...
LCD display, as follows. Up to 9 individual measurements can be stored. If 9 measurements are already stored, the memory is full and the following screen is displayed: After saving, the thermometer returns automatically to the measurement mode. 50449/onecal/1001 onecal...
6.13 Erasing all data To clear the memory, i.e. erasing all the saved data (up to 9 individual data points), from the measurement mode press "-", then "enter", and then "+". 50449/onecal/1001 onecal...
(1) Unscrew the 2 screws of the battery cover located at the rear face of the electronic box. (2) Replace the battery. Use only approved batteries, i.e. Duracell MN1604/ Procell PC1604 or any 6F22 or 6F22P. (3) Put the cover back and tighten the screws again. Figure 4 50449/onecal/1001 onecal...
(2) Connect the plug to the electronic box and secure it with the screw. (3) Carry out the one point verification as per 7.6. (4) Verify the correct functionning of the by measuring a known temperature. (5) The is ready to work again. 50449/onecal/1001 onecal...
Ohmmeter the resistance between the grounding cable clip and the body of the temperature probe. It shall not exceed 10 ohm. (7) Carry out the one point verification as per section 7.6. (8) The is ready to work again. 50449/onecal/1001 onecal...
0.2 °C ( 0.4 °F) compared to the true zero of the Pt-1000 resistance, and the stability of the temperature is within 0.03 °C ( 0.06 °F). 50449/onecal/1001 onecal...
Recovering the previous calibration data If for any reason one wants to return to the previous calibration, this may be achieved from the calibration menu as follows: (1) Press simultaneously the keys "enter" and "+", then "+", and "+". 50449/onecal/1001 onecal...
The memory is full. To store other individual readings first delete some data or erase them all. Press (-), then (+), the onecal returns in measurement mode. does not shut off Press "off" again. and looks as...
2 m / 7ft 7.6 m / 25 ft 22.8 m / 75 ft 33.5 m / 110 ft Cable material FEP jacket Instrument protection IP 54 Frame material antistatic polyamide base Electronic box material coated aluminium .../... 50449/onecal/1001 onecal...
Page 25
Class I, Division 1, Groups C&D, T4 Class I, Zone 0, AEx ia IIB T4 TIIS (Japan) (ia) IIBT4 KDB (Poland) EExiaIIBT4 GOSGORTECHNADZOR (Russia) 0ExiaIIBT4X Temperature sensor Pt-1000 RTD element Maintenance modular design / easy exchange of parts Specification subject to change without notice. 50449/onecal/1001 onecal...
Error 03 : Write/Read Data out of range Error 04 : Write/Read Data Index Error 05 : Read Data Index out of range Error 06 : Read Data Memory Figure 7 50449/onecal/1001 onecal...
Indicate the serial number and the year of production of the thermometer (printed on the rear of the electronic box). > 163 °C / > 325 ° F HERMetic Onecal with grounding cable Range > 100 °C / > 212 ° F HERMetic Onecal with grounding cable Range...
Need help?
Do you have a question about the onecal and is the answer not in the manual?
Questions and answers