Asus AAEON OMNI-BT Series User Manual
  1. Manuals
  2. Brands
  3. Asus Manuals
  4. Touch Panel
  5. AAEON OMNI-BT Series
  6. User manual
Asus AAEON OMNI-BT Series User Manual

Asus AAEON OMNI-BT Series User Manual

Industrial modular touch panel pc with intel bay trail platform
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
All manuals and user guides at all-guides.com
OMNI-BT Series
Industrial Modular Touch Panel PC
With Intel® Bay Trail Platform
User's Manual 2
nd
Ed
Last Updated: March 30, 2018

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AAEON OMNI-BT Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Asus AAEON OMNI-BT Series

Summary of Contents for Asus AAEON OMNI-BT Series

  • Page 1 All manuals and user guides at all-guides.com OMNI-BT Series Industrial Modular Touch Panel PC With Intel® Bay Trail Platform User’s Manual 2 Last Updated: March 30, 2018...

  • Page 2: Copyright Notice

    All manuals and user guides at all-guides.com Copyright Notice This document is copyrighted, 2018. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
  • Page 3 All manuals and user guides at all-guides.com Acknowledgement All other products’ name or trademarks are properties of their respective owners. Microsoft Windows is a registered trademark of Microsoft Corp.  Intel, Pentium, Celeron, and Xeon are registered trademarks of Intel Corporation ...
  • Page 4 All manuals and user guides at all-guides.com Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity OMNI-BT Series Panel PC (panel size from 10.4 – 21.5”)  Product CD with drivers ...

  • Page 5: About This Document

    All manuals and user guides at all-guides.com About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product.

  • Page 6: Safety Precautions

    All manuals and user guides at all-guides.com Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. All cables and adapters supplied by AAEON are certified and in accordance with the material safety laws and regulations of the country of sale.
  • Page 7 All manuals and user guides at all-guides.com As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers.
  • Page 8 All manuals and user guides at all-guides.com FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
  • Page 9 All manuals and user guides at all-guides.com China RoHS Requirements (CN) 产品中有毒有害物质或元素名称及含量 AAEON Panel PC/ Workstation 有毒有害物质或元素 部件名称 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) 印刷电路板 ○ ○ ○ ○ ○ ○ 及其电子组件 外部信号 ○ ○...
  • Page 10 All manuals and user guides at all-guides.com China RoHS Requirement (EN) Poisonous or Hazardous Substances or Elements in Products AAEON Panel PC/ Workstation Poisonous or Hazardous Substances or Elements Hexavalent Polybrominated Polybrominated Component Lead Mercury Cadmium Chromium Biphenyls Diphenyl Ethers (Pb) (Hg) (Cd)

  • Page 11: Table Of Contents

    All manuals and user guides at all-guides.com Table of Contents Chapter 1 - Product Specifications ..................1 Specifications 1.1.1 OMNI-3105-BT .................... 5 1.1.2 OMNI-3125-BT ..................... 7 1.1.3 OMNI-3155-BT .................... 9 1.1.4 OMNI-2155 ....................11 1.1.5 OMNI-3175-BT ................... 13 1.1.6 OMNI-3195-BT ................... 15 1.1.7 OMNI-2215-BT ...................
  • Page 12 All manuals and user guides at all-guides.com List of Jumpers 2.2.1 Clear CMOS (JP1) ..................37 2.2.2 AT/ATX Mode Selection (JP3) ..............37 2.2.3 LVDS Port Backlight Lightness Control Mode Selection (JP4) ..37 2.2.4 LVDS Inverter Voltage Selection (JP5) ..........37 2.2.5 Touch Selection (JP8) ................
  • Page 13 All manuals and user guides at all-guides.com Installing the Hard Disk Drive Installing DRAM Mount the OMNI onto the wall Assemble the OMNI panel and the CPU Box P-CAP Touch Screen Operating Chapter 3 - AMI BIOS Setup ....................66 System Test and Initialization AMI BIOS Setup Setup Submenu: Main...
  • Page 14 All manuals and user guides at all-guides.com Setup submenu: Security Setup submenu: Boot Boot: BBS Priorities Setup submenu: Exit Chapter 4 – Drivers Installation & Touchscreen Settings ..........91 Product CD/DVD PCAP Dual Monitor Touch Settings Appendix A - Watchdog Timer Programming..............102 Watchdog Timer Initial Program Appendix B - I/O Information ....................

  • Page 15: Chapter 1 - Product Specifications

    All manuals and user guides at all-guides.com Chapter 1 Chapter 1 - Product Specifications...

  • Page 16: Specifications

    All manuals and user guides at all-guides.com Specifications System Intel® Celeron® J1900, 2 GHz Processor  Intel® Atom™ N2807, 1.58 GHz 204-pin DDR3L 1333 MHz SODIMM x 1, up to System Memory  8 GB, (J1900) 204-pin DDR3L 1333 MHz SODIMM x 1, up to 4 GB, (N2807) Intel 10/100/100Base-TX, RJ-45 x 2 Ethernet...
  • Page 17 All manuals and user guides at all-guides.com Support OMNI-2155/2215/3155/3175/3195 Series Panel PC Windows® 10 OS Support  Windows ® Windows® 7 Windows Embedded Standard 7 Linux kernel 2.6.x or above Environmental -10°C~60°C with industrial grade device (with Operating Temperature  0.5 m/s air flow, according to IEC68-2-14, CPU: N2807) -10°C~55°C with industrial grade device (with...

  • Page 18: Power Supply

    All manuals and user guides at all-guides.com Power Supply 9 ~ 30 V DC Input  Chapter 1 – Product Specifications...

  • Page 19: Omni-3105-Bt

    All manuals and user guides at all-guides.com 1.1.1 OMNI-3105-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel Mount / VESA 100 Mounting  280 x 239 x 59 mm (11 x 9.4 x 2.3") Dimension (W x H x D) ...
  • Page 20 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  90 ± 3% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 21: Omni-3125-Bt

    All manuals and user guides at all-guides.com 1.1.2 OMNI-3125-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel Mount / VESA100 Mounting  329 x 288 x56 mm (13 x 11.3 x 2.2") Dimension (W x H x D) ...
  • Page 22 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  90 ± 3% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 23: Omni-3155-Bt

    All manuals and user guides at all-guides.com 1.1.3 OMNI-3155-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel Mount / VESA 100 Mounting  369 x 314 x 58 mm (14.5 x 12.4 x 2.3") Dimension (W x H x D) ...
  • Page 24 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  ≥85% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 25: Omni-2155

    All manuals and user guides at all-guides.com 1.1.4 OMNI-2155 Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel Mount / VESA 100 Mounting  420 x 265 x 60 mm (16.5 x 10.4 x 2.4") Dimension (W x H x D) ...
  • Page 26 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  90 ± 3% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 27: Omni-3175-Bt

    All manuals and user guides at all-guides.com 1.1.5 OMNI-3175-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel mount / VESA100 Mounting  400 x 370 x 59 mm (15.7 x 14.6 x 2.3") Dimension (W x H x D) ...
  • Page 28 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  ≥85% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 29: Omni-3195-Bt

    All manuals and user guides at all-guides.com 1.1.6 OMNI-3195-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel mount / VESA 100 Mounting  460.8 x 410 x 62.7 mm (18.1 x 16.1 x 2.5") Dimension (W x H x D) ...
  • Page 30 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  ≥85% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 31: Omni-2215-Bt

    All manuals and user guides at all-guides.com 1.1.7 OMNI-2215-BT Mechanical IP65/ NEMA 4 for aluminum front bezel Construction  Panel mount / VESA 100 Mounting  550 x 373 x 53 mm (21.7 x 14.7 x 2.1") Dimension (W x H x D) ...
  • Page 32 All manuals and user guides at all-guides.com Touchscreen (P-CAP) Projected capacitive touch screen Type  ≥85% Light Transmission  Lifetime —  Chapter 1 – Product Specifications...

  • Page 33: Omni Modules

    All manuals and user guides at all-guides.com OMNI Modules Featuring a modular designed, the OMNI-BT Series Panel PC can be fitted with a number of modules to expand its base capabilities. Please refer to the sections below for their features. Note: The interface between the CPU box and the module is through PCIe signal.

  • Page 34: Minicard And Sim Card Module

    All manuals and user guides at all-guides.com 1.2.3 MiniCard and SIM Card Module Features MiniCard x 2  SIM Card x 2  1.2.4 RS-232/422/485 Module Features RS-232/422/485 x 4  (Selectable by jumper) Note: You need to install the COM Port driver Chapter 1 –...

  • Page 35: Isolated Rs-232/422/485 Module

    All manuals and user guides at all-guides.com 1.2.5 Isolated RS-232/422/485 Module Features Isolated RS-232/422/485 x 4  (Selectable by jumper) 2k Vdc Isolation  Note: You need to install the COM Port driver 1.2.6 Digital I/O Module Features Digital I/O x 8 ...

  • Page 36: Audio Module

    All manuals and user guides at all-guides.com 1.2.8 Audio Module Features Mic-in  Line-out  Support plug and play after  installing driver&reboot 1.2.9 HMS Module Features 10/100 Ethernet x 2  Note: a. Not include HMS I/O card b. Europe Limitation 1.2.10 COM x 4 + DIO x 16 Module Features Isolated RS-232/422/485 x 4...

  • Page 37: Wifi 802.11 B/G/N Module

    All manuals and user guides at all-guides.com 1.2.11 Wifi 802.11 b/g/n Module Features Support 802.11 b/g/n  Support BT 3.0  1.2.12 RS-485/422/232 x 2 Module Features RS-485/422/232 x 2  Selection by jumper  COM4 Chapter 1 – Product Specifications...

  • Page 38: Chapter 2 - Hardware Information

    All manuals and user guides at all-guides.com Chapter 2 Chapter 2 – Hardware Information...

  • Page 39: Dimensions

    All manuals and user guides at all-guides.com Dimensions 2.1.1 Dimensions: Main Panels OMNI-3105-BT Chapter 2 – Hardware Information...
  • Page 40 All manuals and user guides at all-guides.com OMNI-3125-BT Chapter 2 – Hardware Information...
  • Page 41 All manuals and user guides at all-guides.com OMNI-3155-BT Chapter 2 – Hardware Information...
  • Page 42 All manuals and user guides at all-guides.com OMNI-2155 Chapter 2 – Hardware Information...
  • Page 43 All manuals and user guides at all-guides.com OMNI-3175-BT Chapter 2 – Hardware Information...
  • Page 44 All manuals and user guides at all-guides.com OMNI-3195-BT Chapter 2 – Hardware Information...
  • Page 45 All manuals and user guides at all-guides.com OMNI-2215-BT Chapter 2 – Hardware Information...

  • Page 46: Dimensions: Omni Modules

    All manuals and user guides at all-guides.com 2.1.2 Dimensions: OMNI Modules USB/ CAN/ LAN Module Dual LAN Module MiniCard & SIM Card Module RS-232/422/485 Module Chapter 2 – Hardware Information...
  • Page 47 All manuals and user guides at all-guides.com Isolated RS-232/422/485 Module Digital I/O Module Audio Module HMS Module Chapter 2 – Hardware Information...
  • Page 48 All manuals and user guides at all-guides.com COM x 4 + DIO x 16 Module COM5 COM3 COM4 COM6 COM x 2 Module COM3 COM4 Chapter 2 – Hardware Information...

  • Page 49: Dimensions: Cables

    All manuals and user guides at all-guides.com 2.1.3 Dimensions: Cables Touch and Panel Select Cable LVDS Cable Chapter 2 – Hardware Information...

  • Page 50: List Of Jumpers

    All manuals and user guides at all-guides.com List of Jumpers Please refer to the table below for all of the system’s jumpers that you can configure for your application Label Function Clear CMOS AT/ATX mode selection LVDS Port Backlight Lightness Control Mode Selection LVDS inverter Voltage Selection Touch Selection COM2 +12V/+5V/RING Selection...

  • Page 51: Clear Cmos (Jp1)

    All manuals and user guides at all-guides.com 2.2.1 Clear CMOS (JP1) Normal (Default) Clear CMOS 2.2.2 AT/ATX Mode Selection (JP3) ATX (Default) 2.2.3 LVDS Port Backlight Lightness Control Mode Selection (JP4) 1 2 3 VR Mode PWM Mode (Default) 2.2.4 LVDS Inverter Voltage Selection (JP5) Function +12 V (Default) +5 V...

  • Page 52: Touch Selection (Jp8)

    All manuals and user guides at all-guides.com 2.2.5 Touch Selection (JP8) Function 4, 8 wire 5 wire (Default) 2.2.6 COM2 +12V/+5V/Ring Selection (JP9) Function +12 V Ring (Default) +5 V Chapter 2 – Hardware Information...

  • Page 53: List Of Connectors

    All manuals and user guides at all-guides.com List of Connectors Please refer to the table below for all of the system’s connectors that you can configure for your application Label Function MiniCard Connector with on-board SIM LPC debug port Battery connector SIM socket CN10 CFast connector...

  • Page 54: Minicard Connector With On-Board Sim (Cn3)

    All manuals and user guides at all-guides.com CN45 Combo connector 2.3.1 MiniCard Connector with On-board SIM (CN3) Signal Signal PCIE_WAKE# +V3.3A +1.5V PCIE_CLK_REQ# UIM_PWR UIM_DATA PCIE_REF_CLK- UIM_CLK PCIE_REF_CLK+ UIM_RST UIM_VPP W_DISABLE# PCIE_RST# +V3.3A PCIE_RX- PCIE_RX+ +1.5V SMB_CLK PCIE_TX- PCIE_TX- SMB_DATA PCIE_TX+ USB_D- USB_D+...

  • Page 55: Lpc Debug Port (Cn4)

    All manuals and user guides at all-guides.com +1.5V +V3.3A 2.3.2 LPC Debug Port (CN4) Pin Name Signal Type Signal Level LAD0 +3.3V LAD1 +3.3V LAD2 +3.3V LAD3 +3.3V +3.3V +3.3V LFRAME# LRESET# +3.3V LCLK LDRQ0 LDRQ1 SERIRQ +3.3V Chapter 2 – Hardware Information...

  • Page 56: Battery Connector (Cn6)

    All manuals and user guides at all-guides.com 2.3.3 Battery Connector (CN6) Signal 2.3.4 Cfast Connector (CN10) Pin Name Signal Type Signal Level SATA_TX+ DIFF SATA_TX- DIFF SATA_RX- DIFF SATA_RX+ DIFF PC10 PC11 Chapter 2 – Hardware Information...

  • Page 57: Board To Board Connector (Cn11)

    All manuals and user guides at all-guides.com PC12 PC13 +3.3V +3.3V PC14 +3.3V +3.3V PC15 PC16 PC17 2.3.5 Board to Board Connector (CN11) Pin Name Signal Type Signal Level +V5A +V5A +V5A +V5A +V3.3A +3.3V +V3.3A +3.3V +V3.3A +3.3V EX_PLT_RST# +V12S +12V W_DISABLE0#...
  • Page 58 All manuals and user guides at all-guides.com SMBUS_DATA USB_DN2 DIFF SMBUS_CLK USB_DP2 DIFF P2_REFCLKN DIFF P2_RXN DIFF P2_REFCLKP DIFF P2_RXP DIFF P2_TXN DIFF CLK_PCIE_EXIO_N DIFF P2_TXP DIFF CLK_PCIE_EXIO_P DIFF PCIE_RXN3 DIFF PCIE_TXN3 DIFF PCIE_RXP3 DIFF PCIE_TXP3 DIFF Chapter 2 – Hardware Information...

  • Page 59: Panel Size Select (Cn15) 17 Inch Lcd

    All manuals and user guides at all-guides.com 2.3.6 Panel Size Select (CN15) 17 inch LCD Signal Signal DIO0(GND) DIO1(GND) DIO2(5V) DIO3 DIO4 DIO5 DIO6 DIO7 2.3.7 LVDS Backlight Connector (CN17) Signal Signal BKL_CTL BKL_EN 2.3.8 Mini PCIe Slot (CN18) Pin Name Signal Type Signal Level PCIE_WAKE#...
  • Page 60 All manuals and user guides at all-guides.com PCIE_REF_CLK- DIFF PCIE_REF_CLK+ DIFF W_DISABLE# +3.3V PCIE_RST# +3.3V PCIE_RX-/MSATA_RX+ DIFF +3.3VSB +3.3V PCIE_RX+/MSATA_RX- DIFF +1.5V +1.5V SMB_CLK +3.3V PCIE_TX-/MSATA_TX- DIFF SMB_DATA +3.3V PCIE_TX+/MSATA_TX+ DIFF USB_D- DIFF Chapter 2 – Hardware Information...

  • Page 61: Sata Power Connector (Cn19)

    All manuals and user guides at all-guides.com USB_D+ DIFF +3.3VSB +3.3V +3.3VSB +3.3V +1.5V +1.5V +3.3VSB +3.3V 2.3.9 SATA Power Connector (CN19) Signal + V5S Chapter 2 – Hardware Information...

  • Page 62: Sata Connector (Cn20)

    All manuals and user guides at all-guides.com 2.3.10 SATA Connector (CN20) Pin Name Signal Type Signal Level SATA_TX+ DIFF SATA_TX- DIFF SATA_RX- DIFF SATA_RX+ DIFF 2.3.11 LVDS Connector (CN21) Signal Signal BKL_EN BKL_CTL +V1.5S UIM_PWR2 UIM_DAT2 REFCLK- UIM_CLK2 REFCLK+ UIM_RST2 LVDSA_DATA3# UIM_VPP2 LVDS_DDC_DATA...

  • Page 63: Hdmi Connector (Cn22)

    All manuals and user guides at all-guides.com LVDSB_DATA0# LVDSB_DATA0 LVDSB_DATA1# LVDSB_DATA1 LVDSB_DATA2# LVDSB_DATA2 LVDSB_DATA3# LVDSB_DATA3 LVDSVCC LVDSB_CLK# LVDSB_CLK 2.3.12 HDMI Connector (CN22) Pin Name Signal Type Signal Level TMDS_DAT2+ DIFF TMDS_DAT2- DIFF TMDS_DAT1+ DIFF TMDS_DAT1- DIFF TMDS_DAT0+ DIFF TMDS_DAT0- DIFF TMDS_CLK+ DIFF DIFF...

  • Page 64: Touchscreen Connector (Cn29)

    All manuals and user guides at all-guides.com HPLG_DETECT 2.3.13 Touchscreen Connector (CN29) Signal Signal TOP EXCITE BOTTOM EXCITE LEFT EXCITE RIGHT EXCITE TOP SENSE BOTTOM SENSE LEFT SENSE RIGHT SENSE Chapter 2 – Hardware Information...

  • Page 65: Lan1 Connector (Cn37)

    All manuals and user guides at all-guides.com 2.3.14 LAN1 Connector (CN37) Signal Signal MDI0+ MDI0- MDI1+ MDI2+ MDI2- MDI1- MDI3+ MDI3- 2.3.15 LAN2 Connector (CN38) Signal Signal MDI0+ MDI0- MDI1+ MDI2+ MDI2- MDI1- MDI3+ MDI3- Chapter 2 – Hardware Information...

  • Page 66: Dc-In (Cn39)

    All manuals and user guides at all-guides.com 2.3.16 DC-in (CN39) Signal Signal 9-30V EARTH_GND 2.3.17 COM2 Connector (CN40) RS-232 Signal Signal RS-422 Signal Signal TXD- TXD+ RXD+ RXD- Chapter 2 – Hardware Information...

  • Page 67: Remote Switch Connector (Cn43)

    All manuals and user guides at all-guides.com RS-485 Signal Signal 2.3.18 Remote Switch Connector (CN43) Signal Signal EXT_PWRBTN# 2.3.19 Combo connector (CN45) Signal Signal USB_CM_P7- +V5_TOUCH USB_CM_P7+ +VCC_LVDS_BKLT +VCC_LVDS_BKLT +VCC_LVDS_BKLT L_BKLTNESS_R SENSE ID1# LVDS_BKLTEN ID2# Chapter 2 – Hardware Information...
  • Page 68 All manuals and user guides at all-guides.com Chapter 2 – Hardware Information...

  • Page 69: Assembling Modules

    All manuals and user guides at all-guides.com Assembling Modules To install a module: Step 1 - Insert the connector to the OMNI slot by the side of the PCB box Step 2 - Secure with the screws provided. The module is installed as the image shown below. Chapter 2 –...
  • Page 70 All manuals and user guides at all-guides.com To detach a module: Step 1 –Remove the screws from the module Step 2 – Remove the module The module is detached from the main panel. Chapter 2 – Hardware Information...

  • Page 71: Installing The Hard Disk Drive

    All manuals and user guides at all-guides.com Installing the Hard Disk Drive Put the rubber provided onto the holes of the bracket. Place the HDD onto the bracket and secure with the screws provided Chapter 2 – Hardware Information...
  • Page 72 All manuals and user guides at all-guides.com Hook the setup on to the bar above the PCB board as shown below. Secure it with the screw provided. * Users are advised to use storage devices provided and installed by AAEON. Chapter 2 –...

  • Page 73: Installing Dram

    All manuals and user guides at all-guides.com Installing DRAM To install DRAM, remove the HDD and HDD bracket and insert the RAM module as shown below. * Users are advised to use DRAM modules provided and installed by AAEON. Chapter 2 – Hardware Information...

  • Page 74: Mount The Omni Onto The Wall

    All manuals and user guides at all-guides.com Mount the OMNI onto the wall Step 1 - Glue the waterproof rubber along back side of the panel Step 2 - Screw the provided mounting brackets into the back of the panel Chapter 2 –...
  • Page 75 All manuals and user guides at all-guides.com Step 3 – use screws to secure the panel onto the wall with the wall-mount brackets Chapter 2 – Hardware Information...

  • Page 76: Assemble The Omni Panel And The Cpu Box

    All manuals and user guides at all-guides.com Assemble the OMNI panel and the CPU Box The left photo shows the LCD Kit and the right photo shows BOXER Kit Step 1 - Plug connectors into connector sockets accordingly Chapter 2 – Hardware Information...
  • Page 77 All manuals and user guides at all-guides.com Step 2 - Assemble the panel and CPU Box Step 3 – Slide the CPU Box into the panel and tighten them with screws Chapter 2 – Hardware Information...
  • Page 78 All manuals and user guides at all-guides.com The assembling process is completed Chapter 2 – Hardware Information...

  • Page 79: P-Cap Touch Screen Operating

    All manuals and user guides at all-guides.com P-CAP Touch Screen Operating Always touch the screen with finger pads. The force of finger should be lower than 10g. Chapter 2 – Hardware Information...

  • Page 80: Chapter 3 - Ami Bios Setup

    All manuals and user guides at all-guides.com Chapter 3 Chapter 3 - AMI BIOS Setup...

  • Page 81: System Test And Initialization

    All manuals and user guides at all-guides.com System Test and Initialization The system uses certain routines to perform testing and initialization. If an error, fatal or non-fatal, is encountered, a few short beeps or an error message will be outputted. The board can usually continue the boot up sequence with non-fatal errors.

  • Page 82: Ami Bios Setup

    All manuals and user guides at all-guides.com AMI BIOS Setup The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic system configurations, which is stored in the battery-backed CMOS RAM and BIOS NVRAM so that the information is retained when the power is turned off. To enter BIOS Setup, press <Del>...

  • Page 83: Setup Submenu: Main

    All manuals and user guides at all-guides.com Setup Submenu: Main Chapter 3 – AMI BIOS Setup...

  • Page 84: Setup Submenu: Advanced

    All manuals and user guides at all-guides.com Setup Submenu: Advanced Chapter 3 – AMI BIOS Setup...

  • Page 85: Advanced: Cpu Configuration

    All manuals and user guides at all-guides.com 3.4.1 Advanced: CPU Configuration Options summary: Intel Virtualization Disabled Technology Enabled Optimal Default, Failsafe Default Enable or Disable Intel Virtualization Technology EIST Disabled Enabled Optimal Default, Failsafe Default Enable or Disable EIST Chapter 3 – AMI BIOS Setup...

  • Page 86: Advanced: Ide Configuration

    All manuals and user guides at all-guides.com 3.4.2 Advanced: IDE Configuration Options summary: SATA Mode IDE Mode AHCI Mode Optimal Default, Failsafe Default Chapter 3 – AMI BIOS Setup...

  • Page 87: Advanced: Usb Configuration

    All manuals and user guides at all-guides.com 3.4.3 Advanced: USB Configuration Options summary: Legacy USB Support Enabled Optimal Default, Failsafe Default Disabled Auto Enables BIOS Support for Legacy USB Support. When enabled, USB can be functional in legacy environment like DOS. AUTO option disables legacy support if no USB devices are connected Chapter 3 –...

  • Page 88: Advanced: Hardware Monitor

    All manuals and user guides at all-guides.com 3.4.4 Advanced: Hardware Monitor Chapter 3 – AMI BIOS Setup...

  • Page 89: Advanced: Power Management

    All manuals and user guides at all-guides.com 3.4.5 Advanced: Power Management Options summary: Power Mode ATX Type Optimal Default, Failsafe Default AT Type Select power supply mode. AC Power Loss Last State Optimal Default, Failsafe Default Power On Power Off Select power state when power is re-applied after a power failure.

  • Page 90: Advanced: Super Io Management

    All manuals and user guides at all-guides.com 3.4.6 Advanced: Super IO Management Note: Serial Port 5 ~ 8 are activated with OMNI Module Chapter 3 – AMI BIOS Setup...

  • Page 91: Super Io Management: Serial Port 2 Configuration

    All manuals and user guides at all-guides.com 3.4.6.1 Super IO Management: Serial Port 2 Configuration Options summary: Use This Disabled Device Enabled Optimal Default, Failsafe Default Enable or Disable Serial Port (COM) Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2F8;...

  • Page 92: Super Io Management: Serial Port 5 Configuration

    All manuals and user guides at all-guides.com 3.4.6.2 Super IO Management: Serial Port 5 Configuration Options summary: Use This Device Disabled Enabled Optimal Default, Failsafe Default Enable or Disable Serial Port (COM) Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2D0;...

  • Page 93: Super Io Management: Serial Port 6 Configuration

    All manuals and user guides at all-guides.com 3.4.6.3 Super IO Management: Serial Port 6 Configuration (Optional) Options summary: Use This Device Disabled Enabled Optimal Default, Failsafe Default En/Disable Serial Port (COM) Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2C0; IRQ=7; IO=2D0;...

  • Page 94: Super Io Management: Serial Port 7 Configuration

    All manuals and user guides at all-guides.com 3.4.6.4 Super IO Management: Serial Port 7 Configuration (Optional) Options summary: Use This Device Disabled Enabled Optimal Default, Failsafe Default En/Disable Serial Port (COM) Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2B0; IRQ=10; IO=2B8;...

  • Page 95: Super Io Management: Serial Port 8 Configuration

    All manuals and user guides at all-guides.com 3.4.6.5 Super IO Management: Serial Port 8 Configuration (Optional) Options summary: Use This Device Disabled Enabled Optimal Default, Failsafe Default En/Disable Serial Port (COM) Possible: Use Automatic Settings Optimal Default, Failsafe Default IO=2B8; IRQ=10; IO=2B0;...

  • Page 96: Setup Submenu: Chipset

    All manuals and user guides at all-guides.com Setup submenu: Chipset Chapter 3 – AMI BIOS Setup...

  • Page 97: Chipset: North Bridge

    All manuals and user guides at all-guides.com 3.5.1 Chipset: North Bridge Chapter 3 – AMI BIOS Setup...

  • Page 98: North Bridge: Display Control Configuration

    All manuals and user guides at all-guides.com 3.5.1.1 North Bridge: Display Control Configuration Options summary: DVMT Pre-Allocated Optimal Default, Failsafe Default 128M 160M 192M 224M 256M 288M 320M 352M 384M 416M 448M 480M 512M DVMT Total Gfx Mem 128MB 256MB Optimal Default, Failsafe Default Chapter 3 –...
  • Page 99 All manuals and user guides at all-guides.com Primary IGFX Boot VBIOS default Display HDMI Optimal Default, Failsafe Default LVDS Secondary IGFX Boot Disable Display Optimal Default, Failsafe Default HDMI LVDS LVDS Disabled Enabled Optimal Default, Failsafe Default Panel Type Selection Auto Optimal Default, Failsafe Default Manual...

  • Page 100: Chipset: South Bridge

    All manuals and user guides at all-guides.com 3.5.2 Chipset: South Bridge Options summary: Audio Controller Disabled Optimal Default, Failsafe Default Enabled Chapter 3 – AMI BIOS Setup...

  • Page 101: Setup Submenu: Security

    All manuals and user guides at all-guides.com Setup submenu: Security Change User/Administrator Password You can set a User Password once an Administrator Password is set. The password will be required during boot up, or when the user enters the Setup utility. Please Note that a User Password does not provide access to many of the features in the Setup utility.

  • Page 102: Setup Submenu: Boot

    All manuals and user guides at all-guides.com Setup submenu: Boot Options summary: Quiet Boot Disabled Enabled Optimal Default, Failsafe Default En/Disable showing boot logo. Option ROM Messages Force BIOS Optimal Default, Failsafe Default Keep Current Set display mode for Option ROM Launch PXE OpROM Disabled Optimal Default, Failsafe Default...
  • Page 103 All manuals and user guides at all-guides.com Boot: BBS Priorities Chapter 3 – AMI BIOS Setup...
  • Page 104 All manuals and user guides at all-guides.com Setup submenu: Exit Chapter 3 – AMI BIOS Setup...
  • Page 105 All manuals and user guides at all-guides.com Chapter 4 Chapter 4 – Drivers Installation & Touchscreen Settings...

  • Page 106: Product Cd/Dvd

    All manuals and user guides at all-guides.com Product CD/DVD The OMNI-BT series comes with a product DVD that contains all the drivers and utilities you need to setup your product. Insert the DVD and follow the steps in the autorun program to install the drivers.
  • Page 107 All manuals and user guides at all-guides.com Follow the instructions Drivers will be installed automatically Step 5 – Install MBI Drivers (Optional, Windows 8.1/ 10 only) Open the STEP 5 – MBI (Optional) folder and select your OS Open the Setup.exe file in the folder Follow the instructions Drivers will be installed automatically Step 6 –...
  • Page 108 All manuals and user guides at all-guides.com For Windows 7: Change User Account Control settings to Never notify Chapter 4 – Driver Installation & Touchscreen Settings...
  • Page 109 All manuals and user guides at all-guides.com Reboot and log in as administrator Chapter 4 – Driver Installation & Touchscreen Settings...
  • Page 110 All manuals and user guides at all-guides.com Run patch.bat as administrator Chapter 4 – Driver Installation & Touchscreen Settings...
  • Page 111 All manuals and user guides at all-guides.com For Windows 8: Open the Apps Screen, right click on the Command Prompt tile and select Run as Administrator Chapter 4 – Driver Installation & Touchscreen Settings...
  • Page 112 All manuals and user guides at all-guides.com To install the driver (patch.bat), you will first have to locate the file in command prompt. To do that, first go to the directory which contains the file by entering <drive letter>: eg. if the driver is in D drive, enter D: You are now at the directory containing the installation file.
  • Page 113 All manuals and user guides at all-guides.com For Windows 10 Open the STEP 7 – Serial Port Driver (Optional) folder and select Win10_32_64 Open the Setup.exe file in the folder Follow the instructions Drivers will be installed automatically Step 7.2 – Install USB to UART Driver Open the USB to UART Driver folder and select your OS Open the Setup.exe file in the folder Follow the instructions...
  • Page 114 All manuals and user guides at all-guides.com PCAP Dual Monitor Touch Settings When two panels are used, they can set to be the primary and secondary display. The instruction below shows how this can be done: Go to Display Panel and choose your preferred primary display. Chapter 4 –...
  • Page 115 All manuals and user guides at all-guides.com Go to Tablet PC Settings in Control Panel. Under Display options, select the primary display from step 1. Apply the changes and exit. *Do NOT calibrate the screen on your own. Doing so might disrupt the device’s factory calibration Chapter 4 –...
  • Page 116 All manuals and user guides at all-guides.com Appendix A Appendix A - Watchdog Timer Programming...

  • Page 117: Appendix A - Watchdog Timer Programming

    All manuals and user guides at all-guides.com Watchdog Timer Initial Program Table 1 : Super I/O relative register table Default Value Note SIO MB PnP Mode Index Register Index 0x2E(Note1) 0x2E or 0x4E SIO MB PnP Mode Data Register Data 0x2F(Note2) 0x2F or 0x4F Table 2 : Watchdog relative register table...
  • Page 118 All manuals and user guides at all-guides.com ******************************************************************************** // SuperIO relative definition (Please reference to Table 1) #define byte SIOIndex //This parameter is represented from Note1 #define byte SIOData //This parameter is represented from Note2 #define void IOWriteByte(byte IOPort, byte Value); #define byte IOReadByte(byte IOPort);...
  • Page 119 All manuals and user guides at all-guides.com Appendix B Appendix B - I/O Information...

  • Page 120: Appendix B - I/O Information

    All manuals and user guides at all-guides.com I/O Address Map Note: There is no PS/2 interface on the OMNI-BT series, hence the exclamation marks Appendix B – I/O Information...
  • Page 121 All manuals and user guides at all-guides.com Appendix B – I/O Information...

  • Page 122: Memory Address Map

    All manuals and user guides at all-guides.com Memory Address Map Appendix B – I/O Information...

  • Page 123: Irq Mapping Chart

    All manuals and user guides at all-guides.com IRQ Mapping Chart Appendix B – I/O Information...
  • Page 124 All manuals and user guides at all-guides.com Appendix B – I/O Information...
  • Page 125 All manuals and user guides at all-guides.com Appendix B – I/O Information...
  • Page 126 All manuals and user guides at all-guides.com Appendix C Appendix C – OMNI COM Module / UART Setting...
  • Page 127 All manuals and user guides at all-guides.com 9741215513 [PER-T497], RS-232/422/485 x 2, I/O module Signal type: USB Jumper setting for RS232/422/R85 EX : RS-232 Jumper setting as bellow: Appendix C – OMNI COM Module / UART Setting...
  • Page 128 All manuals and user guides at all-guides.com EX : RS-422 Jumper setting as bellow: Appendix C – OMNI COM Module / UART Setting...
  • Page 129 All manuals and user guides at all-guides.com EX : RS-485 Jumper setting as bellow: RS-232 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 130 All manuals and user guides at all-guides.com RS-422 Pin Define Signal Signal TXD- TXD+ RXD+ RXD- RS-485 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 131 All manuals and user guides at all-guides.com C.2 9741215513 [PER-T371], OMNI COM x 2, USB x 2, LAN x 1, I/O module Signal type: USB COM3, COM4 (RS232 / RS485 / RS422) Appendix C – OMNI COM Module / UART Setting...
  • Page 132 All manuals and user guides at all-guides.com RS-485 Jumper setting as bellow: RS-232 Jumper Setting switch position switch position switch position switch position RS-232 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 133 All manuals and user guides at all-guides.com RS-422 Jumper setting as bellow: RS-422 Jumper Setting switch position switch position switch position switch position RS-422 Pin Define Signal Signal TXD- TXD+ RXD- RXD+ Appendix C – OMNI COM Module / UART Setting...
  • Page 134 All manuals and user guides at all-guides.com RS-485 Jumper setting as bellow: RS-485 Jumper Setting switch position switch position switch position switch position RS-485 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 135 All manuals and user guides at all-guides.com C.3 9741215516 – RS-232/422/485 x 4 Signal type: USB Jumper setting for RS232/422/R85 RS-232 RS422 RS485 JP1 (1-2) JP1 (1-2) JP1 (3-4) JP1 (3-4) JP6 (1-2) JP6 (1-2) JP6 (3-4) JP6 (3-4) JP9 (1-2) JP9 (1-2) JP9 (3-4) JP9 (3-4) JP12 (1-2)
  • Page 136 All manuals and user guides at all-guides.com EX : RS-232 Jumper setting as bellow: RS-422 Jumper setting as bellow: Appendix C – OMNI COM Module / UART Setting...
  • Page 137 All manuals and user guides at all-guides.com RS-485 Jumper setting as bellow: RS-232 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 138 All manuals and user guides at all-guides.com RS-422 Pin Define Signal Signal TXD- TXD+ RXD+ RXD- RS-485 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 139 All manuals and user guides at all-guides.com C.4 9741215517 – Isolation RS-232/422/485 x 4 Signal type: USB Jumper setting for RS232/422/R85 RS-232 RS422 RS485 JP1 (1-2) JP1 (1-2) JP1 (3-4) JP1 (3-4) JP6 (1-2) JP6 (1-2) JP6 (3-4) JP6 (3-4) JP9 (1-2) JP9 (1-2) JP9 (3-4) JP9 (3-4)
  • Page 140 All manuals and user guides at all-guides.com EX : RS-232 Jumper setting as bellow: RS-422 Jumper setting as bellow: Appendix C – OMNI COM Module / UART Setting...
  • Page 141 All manuals and user guides at all-guides.com RS-485 Jumper setting as bellow: RS-232 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 142 All manuals and user guides at all-guides.com RS-422 Pin Define Signal Signal TXD- TXD+ RXD+ RXD- RS-485 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 143 All manuals and user guides at all-guides.com C.5 9741215518 [PER-T432], Isolation RS-232/422/485 x 4, DIO x 16 I/O Module Signal type: USB PCB back side for jumper setting: Jumper setting for RS232/422/R85 RS-232 RS422 RS485 JP1 (1-2) JP1 (1-2) JP1 (3-4) JP1 (3-4) JP6 (1-2) JP6 (1-2) JP1 (3-4)
  • Page 144 All manuals and user guides at all-guides.com EX : Setting for RS-232 RS-422 Jumper setting as bellow: Appendix C – OMNI COM Module / UART Setting...
  • Page 145 All manuals and user guides at all-guides.com RS-485 Jumper setting as bellow: Pin Define RS-232 Pin Define Signal Signal Appendix C – OMNI COM Module / UART Setting...
  • Page 146 All manuals and user guides at all-guides.com RS-422 Pin Define Signal Signal TXD- TXD+ RXD+ RXD- RS-485 Pin Define Signal Signal 16 bit DIO Setting: Use AAEON Hi-Safe Software to configuration Appendix C – OMNI COM Module / UART Setting...
  • Page 147 All manuals and user guides at all-guides.com DIO (16BIT) CN15 Signal Signal DIO1 DIO2 DIO3 DIO4 DIO6 DIO5 DIO8 DIO7 CN16 Signal Signal DIO9 DIO10 DIO12 DIO11 DIO14 DIO13 DIO15 DIO16 Appendix C – OMNI COM Module / UART Setting...
  • Page 148 All manuals and user guides at all-guides.com C.6 UART mode setting 1. Open the device manager in Windows 2. Find the target COM device of Fintek Serial which comes from OMNI COM Module 3. Right click and select Properties 4. Switch to page Advance Setting 5.

This manual is also suitable for:

Aaeon omni-3105-btAaeon omni-3125-btAaeon omni-3155-btAaeon omni-2155Aaeon omni-3175-btAaeon omni-3195-bt ... Show all

Table of Contents