Page 1
ACP-1078 7” WSVGA Android Based Panel PC User’s Manual 1 Last Updated: July 17, 2024...
Page 2
Copyright Notice This document is copyrighted, 2024. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer.
Page 3
Acknowledgement All other products’ name or trademarks are properties of their respective owners. Arm® and Cortex® are registered trademarks of Arm Limited (or its ⚫ subsidiaries). Mali™ is a trademark of Arm Limited (or its subsidiaries). ⚫ ITE is a trademark of Integrated Technology Express, Inc. ⚫...
Page 4
Packing List Before setting up your product, please make sure the following items have been shipped: Item Quantity ACP-1078 ⚫ If any of these items are missing or damaged, please contact your distributor or sales representative immediately. Preface...
Page 5
About this Document This User’s Manual contains all the essential information, such as detailed descriptions and explanations on the product’s hardware and software features (if any), its specifications, dimensions, jumper/connector settings/definitions, and driver installation instructions (if any), to facilitate users in setting up their product. Users may refer to the product page at AAEON.com for the latest version of this document.
Page 6
Safety Precautions Please read the following safety instructions carefully. It is advised that you keep this manual for future references All cautions and warnings on the device should be noted. All cables and adapters supplied by AAEON are certified and in accordance with the material safety laws and regulations of the country of sale.
Page 7
As most electronic components are sensitive to static electrical charge, be sure to ground yourself to prevent static charge when installing the internal components. Use a grounding wrist strap and contain all electronic components in any static-shielded containers. If any of the following situations arises, please the contact our service personnel: Damaged power cord or plug Liquid intrusion to the device iii.
Page 8
FCC Statement This device complies with Part 15 FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation. Caution: There is a danger of explosion if the battery is incorrectly replaced.
Page 10
China RoHS Requirement (EN) Hazardous and Toxic Materials List AAEON System QO4-381 Rev.A0 Hazardous or Toxic Materials or Elements Component Name PCB and Components Wires & Connectors for Ext.Connections Chassis CPU & RAM HDD Drive LCD Module Optical Drive Touch Control Module Battery This form is prepared in compliance with the provisions of SJ/T 11364.
Page 11
Table of Contents Chapter 1 - Product Specifications ..................1 Specifications ......................2 Chapter 2 – Hardware Information ..................4 Dimensions ....................... 5 Connectors ......................11 2.2.1 Upper Side View ..................11 2.2.2 Bottom Side View ................... 11 2.2.3 Left Hand Side View ................12 2.2.4 Right Hand Side View ................
Page 13
Specifications System Processor Rockchip™ RK3568 Quad-Core Arm® Cortex®-A55 Processor System Memory LPDDR4 2GB/4GB (Optional) LCD/CRT Controller — Ethernet 10/100/1000 Base TX x2 I/O Port LAN x 2 COM x 2 USB 3.2 Gen 1 (Type-C OTG) x 1 (For System Recovery) USB 3.2 Gen 1 x 2 USB 2.0 x 2 HDMI x 1...
Page 14
Environmental Operating Temperature 23°F ~131°F (-5°C ~ 50°C) with 0.5 m/s airflow Storage Temperature -4°F ~ 140°F (-20°C ~ 60°C) Storage Humidity 90% @40°C; non-condensing Vibration 1Grms / 5~ 500Hz / operation Shock 15 G peak acceleration (11 msec. duration) CE/FCC Class A Power Supply DC Input...
Page 22
Connectors 2.2.1 Upper Side View Function Power Power Switch. Press for 2 seconds to turn ON/OFF. 2.2.2 Bottom Side View Function HDMI HDMI Type-A Port for HDMI Cable USB Type-A Port for USB 2.0 and USB 3.2 Gen 1 COM 1 DB-9 Port for RS-232/422/485 Giga LAN Port DC In...
Page 23
2.2.3 Left Hand Side View Function USB 3.2 Gen 1 Type-C OTG Port Audio 4-pole Audio Jack for Microphone/Earphone Micro SD Card Socket (Push-Push Type) Nano SIM Nano SIM Card Socket (Push-Push Type with Tray) 2.2.4 Right Hand Side View Function LAN* Giga LAN Port...
Page 24
List of Connectors Please refer to the table below for all of the board’s connectors that you can configure for your application Connector List Power Button: On/Off HDMI Port USB 3.2 Gen 1/USB 2.0 Port COM Port RJ-45 LAN Port USB 3.2 Gen 1 Type-C OTG Audio Jack w/ Mic Function Nano SIM Card...
Page 25
2.3.1 Power Button: On/Off 2.3.2 HDMI Port Pin Name Signal Type Signal Level HDMI_TX2P_CONN DIFF HDMI_TX2N_CONN DIFF HDMI_TX1P_CONN DIFF HDMI_TX1N_CONN DIFF HDMI_TX0P_CONN DIFF HDMI_TX0N_CONN DIFF HDMI_TXCP_CONN DIFF HDMI_TXCN_CONN DIFF PORT_CEC N.C. HDMI_SCL HDMI_SDA Chapter 2 – Hardware Information...
Page 26
Pin Name Signal Type Signal Level VCC5V_HDMI PORT_HPD 2.3.3 USB 3.2 Gen 1/USB 2.0 Port Pin Name Signal Type Signal Level 5V_USB_C USB3_DM_C DIFF USB3_DP_C DIFF USB3_SSRXN_C DIFF USB3_SSRXP_C DIFF USB3_SSTXN_C DIFF USB3_SSTXP_C DIFF 5V_USB_C USB2_N_C DIFF USB2_P_C DIFF Note: The driving current of 5V_USB_C supports up to 2A Chapter 2 –...
Page 27
2.3.4 COM Port RS-232 Pin Name Signal Type Signal Level +10V +10V +10V RI/+5V/+12V IN/ PWR +5V/+12V RS-485 Pin Name Signal Type Signal Level RS485_D- RS485_D+ RS-422 Pin Name Signal Type Signal Level RS422_TX- ±5V RS422_TX+ ±5V RS422_RX+ RS422_RX- Note: COM RS-232/422/485 mode can be set by APP settings. Default is RS-232. Chapter 2 –...
Page 28
2.3.5 RJ-45 LAN Port 1 Pin Name Signal Type Signal Level LAN1_MDI0_P DIFF LAN1_MDI0_N DIFF LAN1_MDI1_P DIFF LAN1_MDI1_N DIFF LAN1_MDI2_P DIFF LAN1_MDI2_N DIFF LAN1_MDI3_P DIFF LAN1_MDI3_N DIFF LED Color Link Speed Left Right Orange 10 Mbps Green 100 Mbps Yellow 1000 Mbps Chapter 2 –...
Page 29
2.3.6 USB 3.2 Gen 1 Type-C OTG Pin Name Signal Type Signal Level TYPEC0_TX1P_C DIFF TYPEC0_TX1N_C DIFF VBUS_TYPEC TYPEC_CC1 TYPEC0_DP_C DIFF TYPEC0_DM_C DIFF N.C. VBUS_TYPEC TYPEC0_RX2N_C DIFF TYPEC0_RX2P_C DIFF TYPEC0_TX2P_C DIFF TYPEC0_TX2N_C DIFF VBUS_TYPEC TYPEC_CC2 TYPEC0_DP_C DIFF TYPEC0_DM_C DIFF N.C. VBUS_TYPEC TYPEC0_RX1N_C DIFF...
Page 30
Note: The driving current of VBUS_TYPEC supports up to 2A. 2.3.7 Audio Jack w/ Mic Function Pin Name Signal Type Signal Level HP_DET HP_J_R N.C. N.C. HP_MIC1N N.C. HP_J_L Chapter 2 – Hardware Information...
Page 31
2.3.8 Nano SIM Card Pin Name Signal Type Signal Level USIM_CLK USIM_DATA USIM_RESET USIM_PWR N.C. Card Detect Chapter 2 – Hardware Information...
Need help?
Do you have a question about the AAEON ACP-1078 and is the answer not in the manual?
Questions and answers