Sharp MZ-1E19 Instruction Manual

SHARP.
INTRODUCTION
Thank you for bu'y g the MZ-1 E19 SHARP MZ Disk Interface.
Before using the MZ Disk Interface, please read this manual carefully to
assure correct operation.
The contents of this manual are subject to change without notice.
If the product is defective, please contact the store where you bought it.
SHARP is not responsible for damage incurred during, or as a result of,
operation.
CAUTION
1. This unit consists of precision parts, such as LSI circuits, that can be
affected by the operating environment. Do not use the unit in place
subject to direct sunlight, extreme change of temperature or high
humidity or dust.
2. Do not bump or drop this unit.
3. Be careful not to touch the connector with your hand.
Static electricity may destroy certain parts.
4. Special attention must be paid when handling disks.
Refer to the MZ-1 F11 Instruction Manual for details.
5. We recommended that you make a copy of the original master disk
and use the copy. Store the original master disk in a safe place. (Refer
to the MZ Disk BASIC Manual included with this unit for the procedure
for copying a disk.)