Care And Maintenance; Troubleshooting - VTech ABC Learning Classroom User Manual

Note:
1. If the power supply is interrupted during the transfer of data to and from the
VTech ABC Learning Classroom™, the data on the VTech
®
Classroom™ may be lost. Before connection, please check and make sure
that your batteries are not running low on power.
2. Refrain from unplugging the USB cable during the transfer of data to and
from the VTech
transfer abnormally or be lost.
If the VTech ABC Learning Classroom™ is connected properly, you will be
®
taken directly to the VTech
can enjoy all of the online features.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit is not in use for an extended period
of time.
4. Do not drop the unit on a hard surface and do not expose the unit to
moisture or water.

TROUBLESHOOTING

If for some reason the program/activity stops working, please follow these
steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with an entire set of new batteries.
If the problem persists, please call our Consumer Services Department at 1-800-
521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative
will be happy to help you.
ABC Learning Classroom™. This may cause the data to
®
ABC Learning Classroom™ website, where you
®
ABC Learning
®
8