Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Stanley FATMAX SFMCD700D2S
Summary of Contents for Stanley FATMAX SFMCD700D2S
- Page 1 www.stanleytools.com.au www.stanleytools.co.nz SFMCD700...
- Page 2 English (original instructions)
- Page 3 SFMCB10...
- Page 4 ENGLISH (Original instructions) Intended use Your STANLEY FATMAX SFMCD700 drill driver has been designed for screwdriving applications and for drilling in wood, metal and plastics. This appliance is intended for professional and private, non professional users. Safety instructions General power tool safety warnings...
- Page 5 (Original instructions) ENGLISH Do not use any adapter plugs with earthed (grounded) g. If devices are provided for the connection of dust power tools. Unmodified plugs and matching outlets will extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce risk of electric shock.
- Page 6 ENGLISH (Original instructions) b. Always start drilling at low speed and with the bit tip b. Use power tools only with specifically designated in contact with the workpiece. At higher speeds, the bit battery packs. Use of any other battery packs may create a risk of injury and fire.
- Page 7 Warning! Do not charge the battery at ambient Chargers temperatures below 10 °C or above 40 °C. ● Use your STANLEY FATMAX charger only to charge Recommended charging temperature: approx. 24 °C. the battery in the tool with which it was supplied. Other Note: The charger will not charge a battery if the cell batteries could burst, causing personal injury and damage.
- Page 8 ● Plug the charger (9) into an appropriate outlet before inserting battery pack (6). Some STANLEY FATMAX chargers are designed to be wall ● The green charging light (9a) will blink continuously mountable or to sit upright on a table or work surface.
- Page 9 (Original instructions) ENGLISH before making any adjustments or removing/installing ● To select reverse, depress the forward/reverse control attachments or accessories. An accidental start-up button on the left side of the tool. can cause injury. ● The center position of the control button locks the tool in the off position.
- Page 10 Maintenance ● Keep the motor running while pulling the bit out of a drilled Your STANLEY FATMAX tool has been designed to operate hole. This will help reduce jamming. over a long period of time with a minimum of maintenance.
- Page 11 Max Drilling capacity These products also comply with Directive 2006/42/EC, 13/35/13 Steel/wood masonry 2014/30/EU and 2011/65/EU. For more information, please Weight contact STANLEY Europe at the following address or refer to the back of the manual. Charger SFMCB10 SFMCB11 SFMCB12 SFMCB14...
- Page 12 Australia & New Zealand Stanley Black & Decker www.stanleytools.com.au www.stanleytools.co.nz Tel.1800 338 002 (Aust) or Tel. 0800 339 258 (NZ) 810 Whitehorse Road Box Hill VIC 3128, Australia NA315051 09/2021...
Need help?
Do you have a question about the FATMAX SFMCD700D2S and is the answer not in the manual?
Questions and answers