Bushnell 119467C Instruction Manual

MIL DOT RIFLESCOPE INSTRUCTION MANUAL
USING MIL DOTS
Your new Bushnell riflescope contains a mil-dot reticle, the most
accurate means of range estimation using a manual optical device.
These mil dots also allow precise leads for moving targets and exact
compensation for shooting in a crosswind. The zoom ring 9x marking
is red instead of white because this is the synchronized magnification
for ranging on these mil dots.
RETICLE DESCRIPTION
The middle of this reticle contains four evenly spaced mil dots arrayed
outward vertically and horizontally from the center. Actually, because
the very center dot was left out to allow clear aiming, the reticle
represents five mils in any direction -- ten vertical mils -- as shown in
the illustration. Note that the most outward dot is replaced by the
edge of the heavier reticle line.
One mil is the space from center-dot to center-dot. One-half and
one-quarter mils are easy to estimate mentally; with practice, you can
measure tenths of mils for the most exact ranging.
RANGING WITH YOUR MIL-DOT RETICLE
The mil is an angular measurement -- 1/6400th of a circle -- which
equals almost precisely one yard at 1000 yards, or one meter at
1000 meters. This proportional relationship makes possible a simple
formula to compute distances:
The Measured Object's Width
Or Height In Yards x 1000
Object's Width Or Height In Mils
This formula works equally well with meters, but don't mix meters
and yards: Measure the object in yards to find the distance in yards,
use meters to yield distances in meters.
Looking through your scope, set at 9x, select an object at the distance
you want to range -- an object whose width or height you know or
can estimate accurately. Man-made objects of uniform size, such as
fenceposts, are best, but any object of known dimensions will do.
Measure the object's height or width carefully in mils, compute it
according to the formula and you will find its range. Support your
rifle and be precise when measuring objects; any measuring error
causes an error in the computed range. Equally, mis-estimating the
object size results in a proportional range error.
Here's an example: A coyote is sunning himself in a snowfield beside
a fencepost; having crossed the fence earlier, you know that the post
is four feet high, or 1.33 yards. The fencepost measures 2.5 mils in
your reticle.
1.33 yards x 1000
2.5 mils
Since this is a variable power scope and the reticle stays the same size
no matter the magnification, it must be set at the 9x index dot to
synchronize the mil-dot size for ranging
CALCULATING HOLDS FOR WIND AND MOVING TARGETS
Your horizontal mil dots provide a precise way of holding for
crosswinds and target movement. Just look in your cartridge's wind
drift and moving target tables to determine the exact holds for
different distances. The accompanying table lists one-mil widths from
100 to 600 yards, so you can calculate how many mils to hold right or
left when firing in a crosswind, or engaging a moving target.
LIT. #: 98-0397/03-04
= Range In Yards
1330
= = 532 Yards
2.5
One mil is the distance between center of dots. It's easy to measure
in half-mils or even quarter-mils but with practice you can measure
tenths of a mil.
MIL WIDTH FOR WIND AND MOVING TARGET LEADS
Distance
100 Yards
200 Yards
300 Yards
400 Yards
500 Yards
600 Yards
LIFETIME LIMITED WARRANTY*
Your Bushnell® product is warranted to be free of defects in materials
and workmanship for the lifetime of the original owner. The Lifetime
Limited Warranty is an expression of our confidence in the materials and
mechanical workmanship of our products and is your assurance of a lifetime
of dependable service. In the event of a defect under this warranty, we
will, at our option, repair or replace the product, provided that you return
the product postage prepaid. This warranty does not cover damages caused
by misuse, improper handling, installation, or maintenance provided by
someone other than a Bushnell Authorized Service Department.
Any return in the U.S. or Canada made under this warranty must be
accompanied by the items listed below:
1) A check/money order in the amount of $10.00 to cover
the cost of postage and handling
2) Name and address for product return
3) An explanation of the defect
4) Proof of Purchase
5) Product should be well packed in a sturdy outside shipping carton, to
prevent damage in transit, with return postage prepaid to the
address listed below:
IN U.S.A. Send To:
Bushnell Performance Optics
Attn.: Repairs
8500 Marshall Drive
Lenexa, Kansas 66214
For products purchased outside the United States or Canada please contact
your local dealer for applicable warranty information. In Europe you may also
contact Bushnell at: BUSHNELL Performance Optics Gmbh
European Service Centre
MORSESTRASSE 4
D- 50769 KÖLN
GERMANY
Tél: +49 (0) 221 709 939 3
Fax: +49 (0) 221 709 939 8
This warranty gives you specific legal rights.
You may have other rights which vary from country to country.
©2004 Bushnell Performance Optics
One Mil At This Distance (Inches)
3.6" (0.1 Yard)
7.2" (0.2 Yard)
10.8" (0.3 Yard)
14.4" (0.4 Yard)
18.0" (0.5 Yard)
21.6" (0.6 Yard)
IN CANADA Send To:
Bushnell Performance Optics
Attn.: Repairs
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9
www.bushnell.com