Page 1
36'' 2.1 Soundbar Model: 100043851 PRODUCT GUIDE August 25, 2023_V4 We‘d love to hear from you. Scan with your Walmart app and let us know what you think.
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions – The safety and operating instructions should be retained for future reference. 3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. 4.
Page 3
IMPORTANT SAFETY INSTRUCTIONS 15. Do not install this equipment in a confined or built-in space such as a book case or similar unit, and maintain well-ventilated conditions. The ventilation should not be impeded by covering the ventilation openings with items, such as newspaper, tablecloths, curtains, etc.
Page 4
IMPORTANT SAFETY INSTRUCTIONS 20.The equipment shall be used at maximum 35 degree C ambient temperature. 21. WARNING: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Φ4.0mm 22. Batteries should not be exposed to excessive heat such as sunshine, fire, or the like. WARNING: Danger of explosion if the remote control batteries are incorrectly replaced.
Page 5
IMPORTANT SAFETY INSTRUCTIONS 28. Roku TV, Roku TV Ready, and the Roku TV Ready logo are trademarks of Roku, Inc. CAUTION: Risk of explosion if the battery is replaced by an incorrect type – replacement of a battery with an incorrect type that can defeat a safeguard (for example,in the case of some lithium battery types);...
LEGAL & COMPLIANCE 1. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 2. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CONTROLS & CONNECTIONS Back of Soundbar Optical HDMI (ARC) Power Port Digital Optical HDMI Out (ARC) Audio In Playback Analog Audio In (Stereo 3.5mm)
Page 10
Front of Soundbar Right Side of the Soundbar Volume up Volume down Increase the loudness Decrease the loudness of the audio of the audio Source Power Press to change Press to turn Soundbar the audio source on or o...
FIRST-TIME SETUP Back of Soundbar CHOOSE ONE CABLE* AND CONNECT IT TO YOUR TV 3.5MM AUX DIGITAL HDMI(ARC) CABLE OPTICAL CABLE BEST GOOD BETTER If the output volume is not loud enough, strongly recommend using Dolby Audio content, your TV must support To enjoy Aux connection.
Page 12
Connect the power cable to the Soundbar AC IN as shown. Plug the power cable into an electrical outlet. Back of Soundbar...
Page 13
Insert the included batteries and put the battery cover back into place. Press the SOURCE button to switch between audio sources, For example, if you connected your TV to AUX, Power set the Soundbar to AUX. Source...
USING THE REMOTE Power Bluetooth Press to enter Bluetooth input Source Press to change the input source Play / Pause Volume up Press to play or pause Press to increase volume Previous track Next track Press to return to previous track Press to skip to the next track Volume down Talk mode...
Page 15
For the best surround sound experience, position the Soundbar as shown. The Soundbar should be close to ear level. Soundbar is centered below the TV. (If your TV permits it, you can also slide the Soundbar underneath the TV.)
LED INDICATOR LED Indicator is located here. button on the remote control. Standby Solid Red Optical Solid Purple Aux in Solid White Solid Green HDMI(ARC) Solid Yellow Bluetooth pairing mode Flashing blue Bluetooth device connected Solid blue Volume up and down Corresponding to the sound source indicator light flash 1 time Maximum and minimum volume Corresponding to the sound source indicator light flash 3 times...
- Alternatively, press the source button on the Soundbar until the indicator light is flashing blue. 2. You can now search for the Soundbar (onn. 36" Soundbar) using your Bluetooth device. Your device is connected with the Soundbar when the blue indicator light stops flashing and becomes solid. For more information, refer to the user documentation that came with the device.
USING BLUETOOTH MODE Your Soundbar supports music streaming from smartphones, tablets, and computers with Bluetooth capability. Device compatibility will vary, see your device’s documentation for more information. Once you have paired your source device to the Soundbar, as long as you stay within range of the Soundbar, your device should remain paired. If the input is changed, the Bluetooth device will disconnect.
WALL-MOUNTING THE SOUNDBAR 720mm(28.346inch) 36" 2.1 Soundbar Model:100043851 Wall Mounting Template MARK HERE MARK HERE Place the included wall mounting template against the wall under your TV. Mark the two bracket holes using a pencil. Ensure there is enough space between the Soundbar and your TV.
Page 20
Wall-Mount Slots Note: Make sure the direction keeps same with the picture. Hang the Soundbar on the wall mount screws then slide down to lock in place.
HELP & TROUBLESHOOTING There is no power. • Press the POWER button on the remote control or on the side of your Soundbar. • Ensure the power cord is securely connected. • Plug a di erent device into the electrical outlet to verify that the outlet is working correctly. There is no sound.
Page 22
I hear buzzing or • Ensure all cables and wires are securely connected. humming. • Connect a di erent source device (TV, Blu-ray player, etc) to see if the buzzing persists. If it does not, the problem may be with the original device. •...
Page 23
Need help? We're here for you every day 7 a.m. – 9 p.m. CST. 1-888-516-2630 Give us a call!
Page 24
FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Page 25
ISED Statement ‐ English: This device complies with Industry Canada license ‐ exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the 100043851 and is the answer not in the manual?
Questions and answers