Optelec Compact 10 HD Features And Functions Manual page 27

Optelec
Standby
Press the orange On / Off button briefly to put Compact 10 HD in standby mode. Compact 10
automatically goes into standby mode if no button is pressed and no movement is detected for a
user-defined amount of time. Briefly pressing the On / Off button powers it back on. You can
change or disable the standby time in the Compact 10 HD menu. See chapter 5.4 for more
information.
2.3. Folding and Unfolding the Compact 10 HD
When unfolding the Compact 10 HD, the screen will be set at an ergonomic angle for reading, and
the magnifier camera will be activated.
To open the Compact 10 HD, follow these steps:
1. Place the Compact 10 HD in front of you so that the screen is facing up, and the Optelec
logo is below the screen.
2. Grab and hold the Compact 10 HD in an upright position. Your fingers hold the feet of the
stand while your thumbs hold the side of the Compact 10 HD.
English
Compact 10 HD & Compact 10 HD Speech
27