Page 1
CLAMP METER Instruction Manual SK-7720 SK-7722 422 Hayashinogo, Ueda City, Nagano Pref., 386-0156 Japan TEL : +81-268-35-1601 / FAX : +81-268-35-1603 E-mail : sales@kaise.com SK-7720 http://www.kaise.com Product specifications and appearance are subject to change without notice due to continual improvements. 70-1201-7720-2 1606...
Page 6
One pair Test Leads (100-57), One 9V Battery 6F22 (S-006P), 1007 Carrying Cace, Instruction Manual 818-02 Temperature Probe, 922 Input Cord for Battery Power (SK-7722 only), 930 Output Cord for Recorder (SK-7722 only), 940 Alligator Clips...
Page 7
REC Key operates in two modes. In the first mode, Maximum and Minimum Values are shown on LCD as C-1 Flow Chart. But, in Resistance or Temperature Measurements, Maximum and Minimum Values are shown on CH1 only. In the second mode, Peak Value of AC / DC current for CH1 can be measured in A +...
Page 8
(In A + V and A + Hz measurements. AC peak for CH1 in A + Hz.) DIFF key can operate in “Peak mode” of C-2. (current only)
Page 9
(Hold down DUTY key for over a second to return to Frequency (Hz) at once.)
Page 10
H. AC ADAPTER Terminal (SK-7722 only) Peak Value ( A + V and A+Hz measurements)
Page 12
(Hold down DUTY key for over a second to return to Frequency (Hz) at once.)
Page 13
(Hold down DUTY key for over a second to return to Frequency (Hz) at once.) Insert Plugs of Temperature Probe (Model 818-02 optional) into COM and ℃ Terminals.
Need help?
Do you have a question about the SK-7720 and is the answer not in the manual?
Questions and answers