Everbilt BHLH4WHDC Use And Care Manual

TOOLS REQUIRED
Caulking gun
Installation
1
ASSEMBLING THE
ALUMINUM PIPE
□ Press the sides of the
aluminum pipe together
and lock them into place.
3
INSTALLING THE EXHAUST HOOD
□ From the outside, pass the pipe through the hole
opening until the vent cap lies flush against the
outside wall surface.
Safety Information
IMPORTANT: Vent the exhaust hood outdoors through a wall or window opening as close as possible to the dryer.
Warranty
WHAT IS COVERED
All merchandise is warranted to be free from defects in workmanship and material for one year from the date of purchase. This includes normal wear and
performance failure on items. The manufacturer will replace or repair at their option.
WHAT IS NOT COVERED
This warranty only covers normal wear and performance failure. It does not cover any malfunction, performance failure, or defect arising from the misuse,
abuse, neglect, or modification of the product. Any damage or malfunction inflicted upon the product by the user or other external sources, or any failure to
comply with the warnings and instructions, is not covered.
For further assistance visit www.HomeDepot.ca.
Use and Care Guide
Easy Access
Exhaust Assembly
Phillips screwdriver
2
ATTACHING THE VENT CAP TO
THE PIPE
□ Attach the vent cap to the pipe.
Ensure the pipe fits snug inside
the collar. Align the clips on the
collar (A) so they snap into the
pipe slots (B).
HARDWARE REQUIRED (NOT INCLUDED)
Screws (4)
3
CUTTING A HOLE THROUGH
THE WALL
□ Cut a hole through the wall ¼ in.
diameter larger than the pipe. For
example, to accommodate a 4 in.
pipe cut a hole 4 ¼ in. in diameter.
NOTICE: Ensure the appropriate tool is used
to cut the hole in the wall according to the type
of wall material.
A B
4
SECURING THE VENT CAP
□ Secure the vent cap to the wall by screwing it into
place and/or caulking around the reveal.
1001803927
BHLH4WHDC
Latex caulking
4 ¼ in
4 in
10.8 cm
10.2 cm
HOMEDEPOT.CA