Removing Classes; Adding Students To Classes - Texas Instruments TINSPIRE Manual Book

Removing classes

If you have a class you no longer need, you can remove it from the
TI-Nspire™ Navigator™ Teacher Software. When you remove a class, the
software removes the class and removes the files on the hard drive that
correspond to that class. If you have students who are not part of any
other classes, the software removes those students as well.
You cannot undo the removal of a class.
Note:
Removing a class
1. If you have a class session running, end it.
2. From the Class Session list, select the class you want to remove.
3. Click
Class > Remove Class
The TI-Nspire™ Navigator™ Teacher Software asks if you are sure you
want to remove the class.
4. Click
Remove

Adding students to classes

After you create your classes, you need to add students to the classes.
You can add students to an active class session, or you can add students
to any class at any time.
If this is your first time using the TI-Nspire™ Navigator™ Teacher
Software, the classroom area may be empty. The software prompts you
to add a class, and to add students to the class. You can click the prompt
in the classroom area to add students, or you can follow the steps
below at any time.
The instructions below explain how to add students after you
Note:
create a class. You can also add students when you create a class by
importing them.
1. Select the class to which you want to add students.
• If class is in session, the student will be added to the current class.
You have the option of adding the student to other classes.
• If class is not in session, use the Class Session controls to select the
class to which you want to add the student.
.
.
Using the Class Workspace 69