Frontgate Holiday Ashland 178257 CLE Assembly Instructions

(3 SECTIONS WITH END TO END LIGHT SOURCE WITH INDOOR USE ADAPTOR)
PLEASE READ INSTRUCTIONS BEFORE ASSEMBLING YOUR TREE
Your Ashland Downswept Fir Tree 7.5ft Clear should contain the following:
If any part is missing please contact a Frontgate Product Specialist.
1 Tree Stand
HOW TO ASSEMBLE AND SHAPE YOUR TREE:
1. Carefully remove the tree from its package.
2. Set the metal stand on a level floor, ensure it is cross shaped for firm standing.
1. MATERIAL: TREE STAND
2. OPEN THE LEGS ON 90 DEGREE ANGLES, UNTIL THE HOLE ON TUBE MATCH.
3. INSERT 3 EYE SCREWS AND SCREW THEM INTO THE TUBE.
4. INSERT TREE TUBE INTO THE STAND,TIGHTN THE EYE BLOT TO SECUR TREE.
3. Remove the protective cap from the tree bottom (C). Insert the tree bottom (C) into the tree stand.
Tighten the eye bolts to secure tree. Remove bubble wrap and cord from the tree bottom (C). To
allow branches to unfold into place. Shape the branches of tree bottom (C).
Ashland Downswept Fir Tree 7.5ft Clear
ASSEMBLY INSTRUCTIONS
1 Adaptor w/Foot Pedal
ASSEMBLY INSTRUCTION FOR TREE STAND
3 EYE SCREWS
(178257 CLE)
3 Tree Sections Labeled 3 Eye Screws
Page 1 of 5