Advertisement
Quick Links
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
MR-125150 Soul Stealer
Please follow the step by step guide and enjoy your
Soul Stealer!
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its
original packing. Keep away from heat and moisture.
PARTS LIST
A. Base x 1
B. Lower Pole x 1
C. Upper Pole x 1
D. Strut x 1
E. Costume x 1
F. Hip Hoop x 1
G. Body Frame x 1
H. Left Arm x 1
I.
Right Arm x 1
J. Right Hand and Book x 1
K. Back Frame x 1
L. Head x 1
M. Lower Tombstone x 1
N. Short Poles x 2
O. Long Poles x 2
P. Upper Right Tombstone x 1
Q. Upper Left Tombstone x 1
R. Fog Hose x 1
S. Fog Machine Adapter x 1
T. Step Pad x 1
U. Universal Adapter (Included) x 1
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 3.0A
B
Back
A
Right
Front
STEP 1
Connect the (B) Lower Pole to the (A) Base using the quick connect push button and pre-drilled
hole as shown in Figure 1.
Then slide the struts from the (B) Lower Pole into the housings on the (A) Base as shown in Figure 2.
U
Screws x 4
P
Attached to the Adapter Box
B
A
Left
1
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children.
1. Please use the adapter supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching color.
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep all objects away from the adapter, as it heats up during operation.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
B
C
A
D
J
K
L
Q
R
C
B
2
STEP 2
Connect the (C) Upper Pole to the (B) Lower Pole using the quick connect push button and
pre-drilled hole as shown in Figure 1.
Then slide the (D) Strut into the housings on the (A) Base and (C) Upper Pole as shown in Figure 2.
Slip the (E) Costume over the (B, C) Poles and let it rest on the (A) Base as shown in Figure 3.
E
F
G
M
S
T
C
1
H
I
L
N
O
C
D
B
A
2
E
3
1/4
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Morris Soul Stealer MR-125150
Summary of Contents for Morris Soul Stealer MR-125150
- Page 1 EASY ASSEMBLY AND OPERATION INSTRUCTIONS MR-125150 Soul Stealer WARNING Please follow the step by step guide and enjoy your This item is not a toy and should be used for decoration only. This item contains small parts that can be a Soul Stealer! choking hazard.
- Page 2 ADAPTER STEP HERE (Included) OPTIONAL: If you choose to use the Step Activation Pad, plug the connector into the input receiving jack marked “TRY ME” on the Function Control Box and set the Step pad in front of the character when ready to display. Note: Do not plug the Power Adapter into power outlet until item assembly is completed.
- Page 3 STEP 7 STEP 8 Lower the housings of the (P) Upper Right Tombstone over the (N, O) Poles on the right until it sets Connect the cables from the Function Control Box in the (G) Body Frame to their corresponding down onto the (M) Lower Tombstone as shown in Figure 1.
- Page 4 OPERATION INSTRUCTIONS: 1. Plug the power adapter into a standard power outlet and adjust the settings on the Function Control Box, located on the (G) Body Frame, as desired. 2. Settings: This switch mode will activate lights, sound, and animation when the Infra-red (IR) sensor is activated and will operate for 1 audio-cycle with each activation.
Need help?
Do you have a question about the Soul Stealer MR-125150 and is the answer not in the manual?
Questions and answers