Morris MR-124911 Easy Assembly And Operation Instructions

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
MR-124911 Lunging Witch With Digit Eyes
Please follow the step by step guide and enjoy your
Lunging Witch With Digit Eyes!
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its original
packaging. Keep away from heat and moisture.
PARTS LIST
A. Base x 1
B. Lower Support Poles x 2
C. Upper Support Poles x 2
D. Dress x 1
E. Hip Hoop x 1
F. Torso Frame x 1
G. Shoulder Frame x 1
H. Blouse x 1
I. Sensor x 1
J. Right Arm x 1
K. Left Arm x 1
L. Head x 1
M. Staff Poles x 3
N. Skull Topper x 1
O. Cape x 1
P. Hat x 1
Q. Step Pad x 1
R. Universal Adapter (Included)
Input: 100 - 240V AC 50/60Hz
Output: 5.9V 3.0A
BEFORE ASSEMBLING, REMOVE ALL THE ABOVE PARTS FROM BOX. IF ANY PART IS MISSING, PLEASE CONTACT CUSTOMER SERVICE AT
SUPPORT@MORRISCOSTUMES.COM, OR BY PHONE 704-332-3304. IN YOUR EMAIL INQUIRY, PLEASE INCLUDE: YOUR ORDER NUMBER, WHO YOU BOUGHT IT FROM,
AND WHAT SPECIFICALLY IS WRONG. THANK YOU.
Locking Pin
Click
Means It's
Locked
B B
Back
A
Right
Front
STEP 1
NOTE: Throughout the instructions, Right and Left are relative to the character. First, assemble the
(B) Lower Support Poles to the (A) Base, and secure by aligning the quick-connect push buttons into
the pre-drilled holes as shown in Figure 1.1.
Now assemble the (C) Upper Support Pole to the (B) Lower Support Pole as shown in Figure 1.2.
NOTE: Slots located on the outer sides of the (C) Upper Support Poles.
A
A
G
M
Slots located on
the outer side
C
B
Left
1.1
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a
choking hazard. Keep all plastic and wire parts away from children.
1. Please use the adapter supplied by the manufacturer.
2. Please assemble the item according to the instructions. Connect all wires according to to their matching
color.
3. Children should be supervised by adults. The item should not be grabbed, as it becomes a tipping
hazard. Keep away from the adapter, as it heats up during operation.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
D
B C
H I
N
C
B
1.2
STEP 2
Lower the (D) Dress down over the (C) Upper Support Poles as shown in Figure 2.1.
Attach the (E) Hip Hoop through the slot housing on the outside of the (C) Upper Support Poles.
Pull elastic band at the top of the (D) Dress over the top of (E) Hip Hoop as shown in Figure 2.2.
E
J K
P
O
E
D
2.1
F
L
Q
Q
D
2.2
1/3