Morris Mangey Rat MR-125146 Easy Assembly And Operation Instructions

EASY ASSEMBLY AND OPERATION INSTRUCTIONS
MR-125146 Mangey Rat
Please follow the step by step guide and enjoy your
Mangey Rat!
CARE AND STORAGE INSTRUCTIONS
For best performance operate your item indoors. When not in use, store this product in its
original packing. Keep away from heat and moisture.
PARTS LIST
Base x 1
A.
x 1
B. Left Foot
x 1
C. Right Foot
x 1
D. Left Knee Pole
x 1
E. Right Knee Pole
x 2
F. Foam Tubes
x 1
G. Lower Body Frame
x 1
H. Hip Hoop
x 1
I. Skirt
x 1
J. Tail
x 1
K. Body Frame
x 1
L. Shirt
x 1
M. Left Arm
x 1
N. Right Arm
x 1
O. Back Frame
x 1
P. Head
x 1
Q. Gauze
R. Step Pad x 1
x 1
S. Universal Adapter (Included)
Input: 100 - 240VAC 50/60Hz
Output: 5.9V 3.0A
D
D
B
Back
Left
A
Right
Front
STEP 1
Slide the (D) Left Knee Pole through the (B) Left Foot and then attach to the (A) Base using the
quick connect push button as shown in Figure 1.
Slide the (E) Right Knee Pole through the (C) Right Foot and then attach to the (A) Base using the
quick connect push button as shown in Figure 2.
Slip the (F) Foam Tubes onto the (D, E) Knee Poles as shown in Figure 3.
A B
K L
E
E
C
A
F
E
F
1
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that can be a choking
hazard. Keep all plastic and wire parts away from children.
1. Please use the adapter supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching color.
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep all away from the adapter, as it heats up during operation.
Please read all instructions carefully before assembling. Save this instruction sheet for future reference.
C D E F
M N
G
2
E
D
3
STEP 2
Attach the (G) Lower Body Frame to the (D, E) Knee Poles using the quick connect push buttons
and pre-drilled holes as shown in Figure 1.
Slide the forked hook of the (H) Hip Hoop into the housing on the (G) Lower Body as shown in
Figure 2.
Lower the (I) Skirt over the (G) Lower Body so that the holes of the (I) Costume are aimed towards
the back as shown in Figure 3.
G
I
H
O
Front
H
Back
G
D
1
J
Q
P
R
S
2 holes at the
back of the dress
Back
I
Front
F
F
2 3
1/3