Fcc Statement; Safety Notices; Industry Canada Statement; Règlement D'industry Canada - Linksys BEFSR41 - EtherFast Cable/DSL Router User Manual

AppendixC

FCC Statement

This product has been tested and complies with the
specifications for a Class B digital device, pursuant to Part
15 of the FCC Rules . These limits are designed to provide
reasonable protection against harmful interference in
a residential installation . This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used according to the instructions, may
cause harmful interference to radio communications .
However, there is no guarantee that interference will not
occur in a particular installation . If this equipment does
cause harmful interference to radio or television reception,
which is found by turning the equipment off and on, the
user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment or
•
devices
Connect the equipment to an outlet other than the
•
receiver's
Consult a dealer or an experienced radio/TV technician
•
for assistance

Safety Notices

Caution: To reduce the risk of fire, use only No . 26 AWG or
larger telecommunication line cord .
Do not use this product near water, for example, in a wet
basement or near a swimming pool .
Avoid using this product during an electrical storm . There
may be a remote risk of electric shock from lightning .
WARNING:
This product contains lead, known
to the State of California to cause cancer, and
birth defects or other reproductive harm . Wash
hands after handling .

Industry Canada Statement

This device complies with Industry Canada ICES-003 rule .
Operation is subject to the following two conditions:
1 . This device may not cause interference and
2 . This device must accept any interference, including
interference that may cause undesired operation of
the device .
EtherFast Cable/DSL Router wth 4-Port Swtch
Warranty and Regulatory Information
Règlement d'Industry Canada
Cet appareil est conforme à la norme NMB003 d'Industrie
Canada .
Le fonctionnement est soumis aux conditions suivantes :
1 . Ce périphérique ne doit pas causer d'interférences;
2 . Ce périphérique doit accepter toutes les interférences
reçues, y compris celles qui risquent d'entraîner un
fonctionnement indésirable .

EC Declaration of Conformity (Europe)

In compliance with the EMC Directive 89/336/EEC, Low
Voltage Directive 73/23/EEC, and Amendment Directive
93/68/EEC, this product meets the requirements of the
following standards:
EN55022 Emission
•
EN55024 Immunity
•
EN60950 Safety
•
0