Advertisement
Quick Links
Advertisement
Related Manuals for Hanwha Vision QNF-C9010V
Summary of Contents for Hanwha Vision QNF-C9010V
- Page 1 NETWORK CAMERA User Manual QNF-C9010V...
- Page 2 Network Camera User Manual Copyright ©2025 Co., Ltd. All rights reserved. Hanwha Vision Trademark Each of trademarks herein is registered. The name of this product and other trademarks mentioned in this manual are the registered trademark of their respective company. Restriction Copyright of this document is reserved.
- Page 3 overview IMPORTANT SAFETY INSTRUCTIONS 20. If you install/disassemble the product in a manner that has not been recommended, the production functions/ performance may not be guaranteed. Install the product by referring to “Installation & connection” in the user manual. 1. Read these instructions. 21.
- Page 4 overview Class construction Please read the following recommended safety precautions carefully. An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a ~ Do not place this apparatus on an uneven surface. protective earthing connection. ~ Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area.
- Page 5 CONTENTS OVERVIEW WEB VIEWER Important Safety Instructions Connecting to the Camera Recommended PC Specifications Password setting Recommended Micro SD/SDHC/SDXC Login Memory Card Specifications Camera Web Viewer Setup NAS recommended specs Optional Accessories for Installation APPENDIX Troubleshooting INSTALLATION & CONNECTION What’s Included At a Glance Installation Adjusting the monitoring direction for the...
- Page 6 ※ The video play performance of the web viewer depends on the performance of the user’s CPU and GPU. RECOMMENDED MICRO SD/SDHC/SDXC MEMORY CARD SPECIFICATIONS ~ Hanwha Vision Memory Card : SPP-E128G, SPP-E256G ~ Recommended capacity : 16GB to 256GB(MLC type recommended) ~ Recommended Manufacturers / Product Type :...
- Page 7 OPTIONAL ACCESSORIES FOR INSTALLATION You can purchase appropriate optional accessories available. Pole Mount Wall Mount and Pole Mount Hanging Mount Back Box and Tilt Mount Cable (Direct Assembly) SBP-400WMW SBP-125WMW1 (Wall&Pole Mount) (Indoor Wall&Pole Mount) SBV-140BW (Back Box) SBP-250WMW (Wall&Pole Mount) SBD-140PMW SBV-140WW SBP-120HMW...
- Page 8 overview Ceiling Mount Corner Mount Parapet Mount Installation Box Assembly Individual Parts Tile Grid SBP-180CMB SBP-300KMW1 SBP-300LMW SBP-300NBW SBP-C15P SBP-140CMT SBP-156KMW SBP-180CMS SBP-150CMI (Ball Head) SBP-300CMTW SBP-300CMTS SBP-300CMI SBP-150CMP SBP-C15H (Telescopic) SBP-300CMW1 (Ball Head) SBP-300CMP SBP-150NBW SBP-900CMW SBP-900CMP SBP-140CMB SBP-156LMW1 SBD-140KMB (Telescopic) (Light version)
- Page 9 installation & connection WHAT’S INCLUDED AT A GLANCE As for each sales country, accessories are not the same. Mount-plate Camera-body Top cover Wiring hole cover Fisheye lens Illumination Sensor Use installation screws of at least M4, L30 for the installation of this product. Reset button Micro USB port PoE Port...
- Page 10 installation & connection INSTALLATION 2. Using the provided Torx L wrench, turn the 2 screws that secure the camera body counterclockwise to release the mount plate. Note that it is not necessary to loosen the screws completely. The camera jack connected to the external cable is not waterproof. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed.
- Page 11 Inserting a Micro SD card Removing a Micro SD card Insert the micro SD card into the micro SD card slot on the camera body in the arrow direction. Gently press down on the exposed end of the Micro SD card as shown in the diagram to eject the Micro SD card from the slot.
- Page 12 installation & connection Installation (mount plate) When connecting cables from the side, first remove the wiring hole cover of the camera body. [Directly installing on wall/ceiling] After installation is complete, configure the web viewer settings menu <Video setup> ; <Camera mounting mode>. Select <Wall>...
- Page 13 Installation (camera body) 2. Remove the protruding part of the 1-hole cable bushing that was removed from the camera body. 3. Use the cap installer to pass through the RJ45 cable. Use a cable bushing compliant with the network cable to be connected. Cap Installer Camera main: use a cable with the diameter of Ø5 to Ø6.5 You can only use a network cable with a diameter of Ø6.5 or less.
- Page 14 installation & connection 5. Insert the cable bushing of the network cable into the camera body. 7. Join the camera body with the mount plate. 0.6~1.0 N·m (0.44~0.74 lb·ft) TR10 6. Connect the network cable connector to the PoE port of the camera body. 8.
- Page 15 ADJUSTING THE MONITORING DIRECTION FOR THE CAMERA 9. Assemble the top cover. ` Adjusting the Rotation The rotation can be configured via the web viewer settings menu <Video setup> ; <Digital rotation>. - The effective range of rotation is a total of ±180 degrees. 0.6~1.0 N·m (0.44~0.74 lb·ft) TR10...
- Page 16 installation & connection CONNECTING WITH OTHER DEVICE Powering and networking Connect the PoE device with the PoE port of the camera. WiFi dongle Connect and use a PoE enabled router. Use a PoE device that complies with the IEEE 802.3af standard. Network Cable Specification Item Contents...
- Page 17 Connecting WiFi Camera Setup 1. Connect OTG adapter (5-pin) and WiFi dongle to the micro USB port. Smartphone Setup 1. Install the Wisenet Installation application. 2. Select the camera SSID after turning on the WiFi. 3. Run the Wisenet Installation application. 4.
- Page 18 network connection and setup You can set up the network settings according to your network configurations. CONNECTING THE CAMERA DIRECTLY TO A DHCP BASED DSL/CABLE MODEM CONNECTING THE CAMERA DIRECTLY TO LOCAL AREA NETWORKING Connecting to the camera from a local PC in the LAN INTERNET 1.
- Page 19 For setting <IP Address>, <Subnet Mask>, and <Gateway>, contact your network administrator. Device manager program can be downloaded from <Support>-<Tool> menu at Hanwha Vision website ~ HTTP Port : Used to access the camera using the Internet browser, defaulted to 80.
- Page 20 network connection and setup When setting multiple cameras Configuring Dynamic IP Receive IP address from DHCP ~ Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN When setting one camera...
- Page 21 The settings may differ depending on the connected Broadband Router model. configure the IP. For more information, refer to the user manual of the applicable router. QNF-C9010V 2. Click < + > at the main page of device manager. ~ Equipment Setting menu appears.
- Page 22 network connection and setup Setting up Port Range Forward for several network cameras CONNECTING TO THE CAMERA FROM A SHARED LOCAL PC ~ You can set a rule of Port Forwarding on the Broadband Router device through its configuration web page. 1.
- Page 23 web viewer CONNECTING TO THE CAMERA Connecting via Bonjour 1. Run the client or operating system in support of the Bonjour protocol. Normally, you would 2. Click the camera name for search. In the Mac operating system, click the camera name searched from the Bonjour tab of Safari. 1.
- Page 24 web viewer PASSWORD SETTING CAMERA WEB VIEWER SETUP When you access the product for the first time, you must register the 1. Click the [Setup ( )] icon. login password. 2. The Settings window appears. 3. You can configure settings for the camera’s basic information, video, audio, network, event, analysis, and For a new password with 8 to 9 characters, you must use at least 3 system over the network.
- Page 25 appendix TROUBLESHOOTING PROBLEM SOLUTION PROBLEM SOLUTION ~ Check if the memory card is defective. ~ On the authentication popup window prompted when initially accessing https, click "View Authentication Certificate" and select the "Always trust when connecting to the designated Cannot record into the Micro SD card. ~ When replacing the Micro SD card, it must be done while the power is disconnected from No video is displayed when accessing webviewer IP"...
- Page 26 Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Hanwha Vision cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
Need help?
Do you have a question about the QNF-C9010V and is the answer not in the manual?
Questions and answers