Page 1
SAT 10 Robo�c Pool Cleaner User Manual Built By...
Page 3
CONTENTS Product Introduc�on 1. Safety Instruc�ons 2. Overview 3.LED Indicators 4. Accessories 5. Technical Data 6. Helpful Tips Opera�on 1. Charging 2. Entering The Pool 3. Ge�ng Out Of The Pool 4. Cleaning 5. Installa�on FAQs 1.Troubleshoo�ng 2.Producer informa�on 18-21 | SAT 10 | Robo�c Pool Cleaner | User Manual...
Page 4
PRODUCT INTRODUCTION Model:SAT-10 Feature: The cordless rechargeable robo�c pool cleaner is well-designed for use in pools of various sizes in any situa�on. Thanks to the compact and lightweight design, it is suitable for pools of various sizes. It can clean the bo�om of a pool without draining the water. With an affordable price, it delivers a more effec�ve, deeper and perfect cleaning result.
Page 5
1.Safety Instruc�ons 2.1 General Precau�ons - Read this manual thoroughly before opera�ng the device. Failure to follow the instruc�ons may result in damage to the cleaner or person injury. our company will not be responsible for any losses or injuries that are caused by improper use. - This cleaner is designed for use only in flat-bo�omed pools.
Page 6
2.Overview The SAT10 robo�c pool cleaner features the following components. LED Indicators: Indicates the ba�ery status. Water Spray Cover: Protects the internal components from water spray. Power Bu�on: Turns the cleaner on and off. Handle: Allows for easy handling and transport of the cleaner. Water Outlet: Releases the filtered water back into the pool.
Page 7
3.LED Indicators The below table outlines the LED indicators displayed on the device and their significance. LED Color Solid Display Flashing Display Flashing 1 sec: Device Star�ng Blue Device Working Flashing 3 secs:Device Idle Charging Low Ba�ery G reen Fully Charged Yellow Device Malfunc�on Purple...
Page 8
4.Accessories Your SAT10 robo�c pool cleaner comes with the following accessories: User Manual (1): This manual provides detailed instruc�ons for opera�ng and maintaining the cleaner. Keep it in a safe place for future reference. SAT10 Cleaner (1): The main cleaning unit. Power Adapter (1): Used to charge the cleaner.
Page 9
5.Technical Data Model SAT 10 Dimensions (L x W x H) 32.2 x 28.5 x 17.1 cm(12.6 x 11.2 x 6.7in) Ba�ery Capacity 7800 mAh Motor Power Power Adapter/Input Voltage 100 - 240VAC,50/60 Hz Power Adapter/Rated Power Storage Temperature 32 to 104°F (0 to 40°c)0�-40�C Suppor�ng depth 1.64-9.84�(0.5-3 m) Waterproof Level...
Page 10
6.Helpful Tips 6.1 Post-Opera�on Procedures - A�er the cleaner has completed its cleaning cycle and is removed from the pool, turn off the power to prevent any accidental ac�va�on. - It is recommended to wait for 20 minutes a�er cleaning before charging the cleaner. This allows the internal components to cool down and helps prolong the ba�ery life.
Page 11
OPERATION When the device is working, do not enter the water or get close to the device to prevent accidents. The operator must monitor on site and give prompts and warnings. Our company won’t be responsible for the liabili�es caused if the operator fails to do so. | SAT 10 | Robo�c Pool Cleaner | User Manual...
Page 12
1.Charging Before using the cleaner for the first �me, ensure that it is fully charged. Connect the power adapter to a standard electrical outlet and place the cleaner onto the charger's cradle.The charger indicator lights will show the charging status. Four fully lit indicator lights indicate a full charge.
Page 13
2.Entering The Pool - Make sure the cleaner is fully charged before placing it in the pool. - Press and hold the power bu�on un�l you hear a two-second-long startup sound. This indicates that the cleaner is ready to operate. - Gently place the cleaner in the pool, holding it by the handle.
Page 14
3.Ge�ng Out Of The Pool - When the cleaning cycle is complete or when you need to remove the cleaner from the pool, use the provided pick-up hook.A�ach the hook to the handle of the cleaner and careful- ly li� it out of the water at a slow and steady pace. Avoid jerking or pulling the cleaner too quickly, as this could cause damage.
Page 15
4.Cleaning - To clean the cleaner, first, open the fastener on both sides of the machine to separate the bo�om shell from the upper part of the machine. Li� the upper part of the body carefully. - Remove the filter and rinse it thoroughly under running water to remove any trapped debris.
Page 16
5.Installa�on - Align the corresponding slots on both sides of the filter. Press the clasp un�l the filter is in place. - Place the upper half of the cleaner's body onto the chassis, aligning the edges carefully. Press the upper part to ensure the clasp holds the lower shell in place. - Let the cleaner dry in a cool, shaded area for at least 20 minutes before charging or using it again.
Page 17
FAQs (Frequently Asked Ques�ons) If you encounter any issues or have ques�ons that are not addressed in this manual, please contact our customer support team for assistance. We are here to help you get the most out of your SAT10 robo�c pool cleaner and ensure your sa�sfac�on. | SAT 10 | Robo�c Pool Cleaner | User Manual...
Page 18
1.Troubleshoo�ng Problem Possible Cause Solu�on Ba�ery is low The ba�ery has Turn off the cleaner and charge it using (buzzer beeps every depleted during the provided power adapter un�l 3 seconds) opera�on. fully charged. Suc�on power The filter is clogged Turn off...
Page 19
US Toll-free: +1 800-618-8968 Email: support@seautorobots.com Official Website: h�ps://seautorobots.com/ Facebook: @Seauto Monday to Friday, 09:00-18:00 (EST) Warm Tips: You can contact us through the above methods. In order to help you faster, we recommend that you give priority to our online service.
Page 20
Start cha�ng 1. Enter the chat window: Whether you scan the code or click the link, you will directly enter our online chat window. | SAT 10 | Robo�c Pool Cleaner | User Manual...
Page 21
2.Describe your problem: Please tell us in detail the problem you encountered or the help you need us to provide. | SAT 10 | Robo�c Pool Cleaner | User Manual...
Page 22
3. Real-�me communica�on: Our customer service staff will reply to you as soon as possible and interact with you in real �me. FAQ: Customer service working hours: We provide 7*24 hours online service, ready to answer your ques�ons at any �me. Supported languages: Currently supports Chinese (Simplified/Tradi�onal) and English.
Need help?
Do you have a question about the Built SAT 10 and is the answer not in the manual?
Questions and answers