Qlight SH1L Manual

Heavy-Duty LED Steady/Flashing Lights for Vessels and Heavy Industry Applications
SH1L/ SH2L
30 50
66
Thank you for purchasing Qlight's products. Please read this user manual carefully
prior to installation and operation to ensure safe and correct use.
Precautions for Safety
Failure to follow the instructions below may cause a loss of life or serious physical injury.
1. During wiring or maintenance, please completely turn off the power of the product. (Failure to follow this may lead to an electric shock.)
2. Do not install the product in locations that subjects it to excessive dust or water other than the conditions designated by the IP protection
ratings indicated for each product. (Failure to follow these instructions may cause a fire to the product, electric shock, physical injury,
malfunction or damage to the product.)
3. Do not alter or repair this product. If maintenance or repair service is required, please contact your local Qlight contact point. (Failure to
follow these instructions may lead to fire, electric shock, or product damage.)
4. Please apply the correct voltage to the product. (Failure to follow these instructions may lead to fire, electric shock, or product damage.)
5. When the product is applied to a condition that may impact lives or property, please make sure to have a double safety device. (Failure to
follow this may cause damage to property, fire, electric shock and loss of life.)
Precautions for Correct Use
Failure to follow the proper instructions may cause damage to property, the product, or malfunction of the product
that would void the warranty.
1. Please remove any objects that can interrupt ventilation around the product.
2. Please turn off the power of the product immediately if it fails to operate properly.
3. Carefully wire the product according to each product's specification.
4. Please be careful in preventing chemicals such as thinner, benzene, etc. in contact with the surface of the product.
5. Do not apply excessive force/impact to the product.
Ordering Specifications
SH2L - 220
[Model
[Voltage]
number]
|
|
• SH1L / SH1LP • 12/24
- DC12-24V
• 110-AC110V
• SH1TL / SH1TLP
• 220-AC220V
• SH2L / SH2LP
• SH2TL / SH2TLP
Please scan the QR code for more
detailed product information.
www.qlight.com
- R - SUS
[Housing
[Color]
material]
| |
R-Red • None-Al
A-Amber
• SUS-STS316L
G-Green
B-Blue
Product Specifications
Model number
SH1L Standard type
DC12-24V Max.300mA
SH1LP Protection cage type
SH1TL Terminal box type
SH1TLP Protection cage and
terminal box type
SH2L Standard type DC12-24V Max.300mA
SH2LP Protection cage type
SH2TL Terminal box type
SH2TLP Protection cage and
terminal box type
※ CCS compliant : SH1/SH1P only
• Protection rating : IP66
• Ambient operating temperature : -30°C to +50°C
1
Voltage Current Certificate
AC110V 70mA
AC220V 35mA
AC110V 70mA -
AC220V 35mA
Color
R-Red
A-Amber
G-Green
B-Blue