Table of Contents
Advertisement
Quick Links
Coin- Operated
Commercial Dryer
Installation Instructions and
Use and Care Guide
SUBJECT
Important Safety Instruction.........................................2
Pre-Installation Requirements.......................................3
Electrical Requirements................................................3
Exhaust System Requirements..................................3-4
Gas Supply Requirements.............................................4
Rough-In Dimensions....................................................5
Unpacking....................................................................5
Reversing Door Swing...................................................5
Location of Your Dryer..................................................6
Electrical Installation.....................................................7
P/N 134589900E (0903)
All manuals and user guides at all-guides.com
Contents
PAGE
Grounding Requirements..............................................7
Electrical Connections-3-wire....................................8
Electrical Connections-4-wire....................................8
Installation.....................................................................9
Lint Blade Retaining Pin Location.................................9
Meter case instructions..........................................9-12
Replacement Parts.....................................................12
Parts lists................................................................13-14
Warranty....................................................................15
Back Cover.................................................................16
Printed in USA
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Electrolux Frigidaire FCGD3000ES
Summary of Contents for Electrolux Frigidaire FCGD3000ES
-
Page 1: Table Of Contents
All manuals and user guides at all-guides.com Coin- Operated Commercial Dryer Installation Instructions and Use and Care Guide Contents SUBJECT PAGE Important Safety Instruction.........2 Grounding Requirements..........7 Pre-Installation Requirements........3 Electrical Connections—3-wire........8 Electrical Requirements..........3 Electrical Connections—4-wire........8 Exhaust System Requirements........3-4 Installation..............9 Gas Supply Requirements..........4 Lint Blade Retaining Pin Location.........9 Rough-In Dimensions............5 Meter case instructions..........9-12... -
Page 2: Important Safety Instruction
All manuals and user guides at all-guides.com Product Record For Frigidaire warranty information or to contact a Frigidaire Service Center, call 1-866-738-1640 If you need SERVICE or PARTS for your Frigidaire coin-operated washer: be ready to give the model number, serial number and date of purchase. -
Page 3: Electrical Requirements
All manuals and user guides at all-guides.com ELECTRICAL REQUIREMENTS EXHAUST SYSTEM REQUIREMENTS ELECTRIC Dryer Use only 4 inch (10.2 cm) diameter (minimum) rigid or flexible metal duct and approved vent hood which has a swing-out CIRCUIT - Individual 30 amp. branch circuit fused with 30 amp. damper(s) that open when the dryer is in operation. -
Page 4: Gas Supply Requirements
All manuals and user guides at all-guides.com The exhaust system should be inspected and cleaned a Exceeding the length of duct pipe or minimum of every 6 months with normal usage. The more number of elbows allowed in the "MAXIMUM LENGTH" the dryer is used, the more often you should check the charts can cause an accumulation of lint in the exhaust system. -
Page 5: Rough-In Dimensions
All manuals and user guides at all-guides.com UNPACKING ROUGH-IN DIMENSIONS 1. Using the four shipping carton corner posts (two on each side), carefully lay the dryer on its left side and remove foam shipping base. (68.3 cm) To prevent damage, do not use the control panel 3/8"... -
Page 6: Do Not Install Your Dryer
All manuals and user guides at all-guides.com DO NOT INSTALL YOUR DRYER: 4. A minimum of 120 square inches (774.2 square cm) of 1. In an area exposed to dripping water or outside weather opening, equally divided at the top and bottom of the door, is required. -
Page 7: Electrical Installation
All manuals and user guides at all-guides.com ELECTRICAL INSTALLATION GROUNDING REQUIREMENTS ELECTRIC Dryer Before proceeding with electrical installation, install the dryer's coin-metering system (when used) in accordance with the DANGER Improper connection of the equipment separate instructions provided with the meter. grounding conductor can result in a risk of electrical shock. -
Page 8: Electrical Connections-3-Wire
All manuals and user guides at all-guides.com ELECTRICAL CONNECTIONS ELECTRICAL CONNECTIONS FOR 4-WIRE SYSTEM FOR 3-WIRE SYSTEM ELECTRIC Dryer ELECTRIC Dryer 1. Remove the screws securing the terminal block access cover 1. Remove the screws securing the terminal block access cover and the strain relief mounting bracket located on the back of and the strain relief mounting bracket located on the back of the dryer upper corner. -
Page 9: Installation
All manuals and user guides at all-guides.com Lint Blade Retaining Pin Location and Orientation INSTALLATION 1. GAS CONNECTION (Gas dryers only) a. Remove the shipping cap from gas pipe at the rear of the dryer. NOTE: DO NOT connect the dryer to L.P. gas service without converting the gas valve. - Page 10 All manuals and user guides at all-guides.com Timing Cam Pin Chart REPLACING NYLON TIMING CAMS ON ACCUMULATOR MECHANISM NUMBER TIME PER NUMBER TIME PER OF PINS COIN INSERTED OF PINS COIN INSERTED Electrical Shock Hazard 25.7 180 minutes • Disconnect both power supply cords from the electric 22.5 power supply before making these changes.
- Page 11 All manuals and user guides at all-guides.com • Pull coin slide out of coin chute (see FIGURE 4). STEP 6 Set new vend price by adding or removing the appropriate block-out keys and/or dime inserts according to th Table of Vend Prices (see FIGURE 7).
-
Page 12: Replacement Parts
All manuals and user guides at all-guides.com To remove block-out keys, pull straight up. STEP 7 Replace coin receiver block into slide: NOTE: Be sure block-out keys and /or dime inserts are seated • Hold coin receiver right side up in the palm of one hand. properly and ratchet dog is in place with irs spring connected (see FIGURE 8). -
Page 13: Parts Lists
All manuals and user guides at all-guides.com Meter Case Parts List Parts List For Greenwald Dryer Timers Timer Assembly Timer Assembly Model 50-1232-9 Model 50-1223-10 ITEM PART NUMBER DESCRIPTION 50-61-13-2 Timing motor, 115VAC, 1/180RPM 51-161-4 Timing cam, 4-PIN (45 Minutes)* 00-6164 Switch *Additional... - Page 14 All manuals and user guides at all-guides.com V8 Coin Chute Parts List 20-3000 20-3020 V8 Parts List DESCRIPTION REQ. 20-3020 20-3000 DESCRIPTION REQ. 20-3020 20-3000 DESCRIPTION REQ. 20-3020 20-3000 ———————————————————————————— ———————————————————————————— ———————————————————————————— 31 COIN SIZING BLOCK varies 20-3007 20-3007 1 SCREW (METRIC) 00-9724 00-7924 16 SPRING...
-
Page 15: Warranty
All manuals and user guides at all-guides.com NEW VEND PRICE ____________________________________________________________ Order required parts using this tear-off. Block-out keys will be shipped to you at no charge. Follow product information Order Form instructions. To change vend price, detach and mail the lower portion to: Customer Service Department Quantity____________________________________________________ Greenwald Industries Inc. -
Page 16: Back Cover
Commercial Appliance Warranty Information Your appliance is covered by a one year limited warranty. For one year from your original date of purchase, Electrolux willpay all costs, except as set forth below, for repairing or replacing any parts of this appliance that prove to be defective inmaterials or workmanship when such appliance is installed, used, and maintained in accordance with the provided instructions.
Need help?
Do you have a question about the Frigidaire FCGD3000ES and is the answer not in the manual?
Questions and answers