Table of Contents
Advertisement
Initial Setup of the Server
When you configure the Server for the initial setup or when the factory default values are
restored, the Setup Wizard will run automatically to guide you through the entire setup
process. Since the Server provides two setup modes for administrators to configure the
Server settings, administrators may choose Standard Settings in addition to Setup
Wizard.
Logging in Administrator Login Window
Follow the steps below to log in Administrator Login page:
1. Launch a standard web browser on a computer connected to the network. (Make sure
the computer you are using supports either Microsoft Internet Explorer 5.5 or
Netscape 5.0 and above.)
2. Enter the default IP address http://192.168.0.1/admin and press Enter key on your
keyboard. The Administrator Login page will be displayed on the screen.
3. Enter the default Username and Password. The default administrator's username is
admin (cannot be changed), and the default password is 1111 (can be changed).
4. Select the desired interface Language as English. Click OK to log in the Server and
the Setup Wizard will automatically guide you through the initial setup process.
Chapter 2: Setup Wizard
12
Advertisement
Table of Contents
