Haier 22T51 User Manual page 30

Select Channels with Numeric Keys
1. Operations to select channels with 1 digit (0-9):
Press the number keys (0-9)on the remote control to select TV channel directly .
2. Operations to select channels with 2 digits (10-99):
Press the number keys with 2 digits (10-99) on the remote control to select TV channels.
3. Operations to select channels with 3 digits (100-199):
Press the number keys with 3 digits (100-199) on the remote control to select TV channels.
Note: With the mode of AV1, AV2, SVIDEO, YPbPr, HDMI1, HDMI2, PC, all functions and
adjustments are similar with TV. User can check it at convenience. HDMI connector can
realize DVI connector function with external HDMI/DVI commutator.
USB signal source operation
Please insert USB memory card into USB interface of TV, press "SOURCE" key on the remote control or front panel to
select USB signal source (if you don't insert the USB memory card into USB interface of TV, operation is invalid), press
"OK" key to enter.
Note: This USB interface only support move U dish, can't connect move hard drive, also can't connect to USB interface of
computer. USB support file format with Mp3/JPG. It isn't compatible with some of move U dishes, please replace move U
dish.
29
( )(6M16