PACKAGE CONTENTS
A
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install
in shaded areas as these areas will not allow the batteries to fully charge
and will reduce the nighttime operating hours for your light. Ensure that
the installation location is away from other nighttime light sources such
as street or porch lamps. These light sources may prevent your solar light
from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries.
At night, the solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location,
daily weather conditions, and season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Installing the solar spot light in the ground
NOTE: Do not use a hammer. If the ground is hard, use water to
soften or a trowel to loosen the soil.
□
Remove the pull tab from the solar panel (first time users only).
□
Firmly slide the spot light head (A) into the stake (C).
Use and Care Guide
Solar Spot Light
B
C
A
C
Part
A
B
400mAh 14430 3.2V LiFePO4
rechargeable battery (pre-installed)
C
□
Push the assembly into the ground.
1
Please contact 1-855-HD-HAMPTON for further assistance.
Item #1001 027 173
Model #71134
Description
Spotlight head
Stake
Quantity
2
2
2
HOMEDEPOT.CA
Need help?
Do you have a question about the 71134 and is the answer not in the manual?
Questions and answers