Page 1
Installation Guide 48-Port Gigabit Ethernet Unmanaged Switch Model GS748 GS748 Link/Speed Mode: Green = 1000M Yellow = 100M/10M On = Link Blink = Activity Power Package contents • Switch • Power cord (varies by region) • Rack-mount kit with four rubber feet...
Log in to your NETGEAR account. NOTE: If you don’t have a free NETGEAR account, you can create one. From the menu on the left, select Register a Product. In the Serial Number field, type the serial number of your switch.
Ethernet surge protector inline between the switch and the outdoor device. Failure to do so can damage the switch. Before connecting this switch to outdoor cables or devices, see kb.netgear.com/000057103 for safety and warranty information.
3. Check the LEDs When you connect the power cord to the switch and plug it into an electrical outlet, the LEDs indicate the status. Description On: The switch is receiving power. Power Off: The switch is not receiving power. Green:1000 Mbps link on this port.
Technical specifications Specification Description Network interfaces 48 Gigabit Ethernet RJ-45 ports that support 1G, 100 M, and 10 M Power input 100–240 VAC, 1.4A max Dimensions 17.3 x 8 x 1.7 in. (440 x 204 x 43.3 mm) (W x D x H) Weight 6.95 lb (3.15 kg) Operating temperature...
Page 6
See the regulatory compliance document before connecting the power supply. For NETGEAR’s Privacy Policy, visit netgear.com/about/privacy-policy/. By using this device, you are agreeing to NETGEAR’s Terms and Conditions at netgear.com/about/terms-and-conditions. If you do not agree, return the device to your place of purchase within your return period.
Need help?
Do you have a question about the GS748 and is the answer not in the manual?
Questions and answers