Toshiba DKT3010-SD - Digital Phone User Manual page 103

Table 13 Feature Button Definitions (continued)
Button
Program – Press to enter User Programming mode, which enables you to re-define
Flexible Buttons to perform other functions, including programming One Touch and
Flexible Buttons, register Call Forward assignments, assign Message Waiting Keys
and assign BGM sources played over the telephone speaker.
Pause/Resume – Press to pause or resume recording a conversation to a voice
mailbox or when playing back the recording.
Record to Voice Mail – Press to record current conversation to voice mailbox.
Release and Answer – Press to disconnect or complete the transfer the current outside
or extension call and automatically answer the new incoming outside or extension call.
Release – Press to disconnect or complete the transfer of the current outside or
extension call and to place your station in the idle condition.
Speed Dial – Press to Speed Dial a telephone number or feature access codes. SD
buttons can be used as either System Speed Dial numbers or Station Speed Dial
numbers.
Pause (Long) – Press to insert a 10-second pause when programming Speed Dial
numbers.
Pause – Press to set either a one-half or two-second pause when programming Speed
Dial numbers. (The pause time is set in system programming).
Start – Press to make an outgoing call using an ISDN trunk.
Sub address – Press to enter a sub address on an ISDN trunk outgoing call.
Background Music – Press to turn Background Music on or off over your station
speaker.
Tone – Press to change the outgoing dialing of the outside line in use from dial pulse to
tone signaling.
Door Unlock – Press to unlock a door lock mechanism.
Strata CTX DKT/IPT Telephone 06/03
Definitions
Button Labels
Delayed Ringing
89