Connection To Devices Equipped With; Dock Control Terminals - Denon ASD-1RBK Operating Instructions Manual

ENGLISH
Connecting Other Sources
Connection to devices equipped with DOCK CONTROL terminals
The iPod can be operated from an amplifier or system device equipped with a DOCK CONTROL
terminal connected to the ASD-1R.
AC Adapter (Included)
(Viewing iPod images)
AV/Control cable (Included)
Signal direction
Audio signal
OUT IN
AC outlet (wall)
AC 120 V, 60 Hz (For U.S.A. & Canada model)
AC 230 V, 50 Hz (For Europe model)
AC 220 V, 50 Hz (For China model)
Device equipped with
dock control terminal
or
L
L
R R
Video signal
OUT IN
Monitor
S VIDEO
IN
S VIDEO
IN
AUDIO IN
L
R
DOCK
CONTROL
4
ENGLISH
Connecting Other Sources
1
MODE SELECT
Set the switch on the
ASD-1R's bottom panel to "DOCK
CONTROL".
2
Connect as shown at the left.
Also refer to the operating instructions of
the device being connected.
3
Connect the included AC adapter to the
DC IN
ASD-1R's terminal and plug the
AC adapter into a power outlet.
4
Load the iPod onto the ASD-1R.
NOTE:
Be sure to switch the communications
mode before turning on the ASD-1R's
power.
The communications mode will not switch
if the MODE SELECT switch is operated
while the power is on.