Temperature and Humidity Range
Temperature
Operating
Non-Operating (mech)
Non-Operating (tape)
Humidity
Operating
Non-Operating (mech)
Non-Operating (tape)
Power Requirements
Voltage
Max Ripple
5 V +/– 5 %
100 mVp-p
12 V +/– 10 % 100 mVp-p
* During Load/Unload
Suspended Particulate
Operating
Less than 150 microgram/m
ESD
Discharge
< 15 kV: No operation failure
Voltage
< 20 kV: No drive damage
Air-cooling Requirement
Surrounding temperature
Clean air flow is recommended to minimize the possibility of data loss.
18
5 ˚C to 40 ˚C ( T<10 ˚C/h)
– 40 ˚C to 70 ˚C ( T<20 ˚C/h)
– 40 ˚C to 45 ˚C ( T<20 ˚C/h)
20 to 80% RH, non-condensing
Maximum wet bulb temperature = 26 ˚C
5 to 95% RH ( RH<30%/h)
20 to 80% RH ( RH<30%/h)
Current*
Tpical
Maximum
1.0 A
2.0 A
0.21 A
0.7 A
3
< 40 ˚C