Diagnostic Tools And Performance; Diagnostic Tools; Hp Library & Tape Tools; Troubleshooting With Library & Tape Tools - HP 330834-B21 - StorageWorks Ultrium 460 Tape Library Drive Module User Manual

11 Diagnostic Tools and
Performance

Diagnostic tools

HP Library & Tape Tools
HP StorageWorks Library & Tape Tools is the recommended diagnostic and support tool for your HP tape
storage product. It is available from a link on the CD shipped with your product or as a free download
from the HP web site. It is supported on nearly all major operating systems.
HP recommends installation of Library & Tape Tools, so that it can be quickly accessed at any time. HP
Support will also request that you use Library & Tape Tools should you need to contact them in the
future, so it is a good idea to have it installed.
See http://www.hp.com/support/tapetools
of the tool.
Troubleshooting with Library & Tape Tools
1. When Library & Tape Tools is first run, it will scan for HP tape drives and libraries on your system
and ask you to select the one to work with. At this time you can see the HBA configuration of your
server and how your devices are connected.
2. Once you have selected your device you have a number of choices for troubleshooting.
• Device identification: shows part number, serial number and information about any cartridge
loaded.
• Firmware upgrade: allows you to locate and upgrade to the latest firmware. You will need to
be connected to the internet for this.
• Run tests: allows you to run proactive tests on your drive, such as the drive assessment test,
which will verify the functionality of your drive in around 20 minutes. HP recommends
running this test before calling HP Support. You will need to provide a 'trusted' cartridge that
can be written to during this test.
• Generate a support ticket: this is a full dump of the drive logs along with interpretation and
is used by HP Support to learn about the condition of your drive. Most useful is the device
analysis section which is the output from approximately 20 rules forming a comprehensive
analysis of the health of your drive. These rules may give advice such as cleaning the head
or trying a different tape if issues are found. The support ticket can be sent to HP Support
for further analysis.
• Run the performance tests: the tests to measure the write/read performance of your tape
drive and the data generation rates of your disk subsystem are also integrated into Library &
Tape Tools. Use these tests to find the performance bottleneck in your system.

Performance Assessment Tools

NOTE:
We strongly recommend that you check the information on our web site at
pat. This contains detailed support information that will enable you to identify bottlenecks and take full
advantage of the performance capabilities of the Ultrium family of tape drives.
for compatibility information, updates and the latest version
Ultrium full-height SCSI Tape Drives
http://www.hp.com/support/
57