Subscribe to Our Youtube Channel
Related Manuals for SW-Motech HTA.01.740.85000/B
Summary of Contents for SW-Motech HTA.01.740.85000/B
- Page 1 ANBAUANLEITUNG mounting instructions • instructions de montage • instrucciones de montaje • istruzioni di montaggio BC.HTA.01.740.35000 beinhaltet • contains • contient • contiene • contiene HTA.01.740.85000/B BC.HTA.00.740.30000 BC.HTA.00.740.12200/B...
- Page 2 ~ 1 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 3 Use thread locker: Indicates that a thread must be coated with liquid thread locker. H (HIGH): high strength; M (MEDIUM): medium strength; L (LOW): low strength. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 4 Ø 18 / ø 8,2 / h 20 Ø 18 / ø 8,4 / h 5 SC.ST.08.050.02.6912.109 US.ST.084.02.125 DB.00.180.082.020.01 HTA.01.740.014/S DB.00.180.084.005.01 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 5 Tighten the screws (5) as specified in the mounting instructions. CAUTION: Tightening the screws (5) too tightly will damage the plastic parts. × × 2.5 Nm The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 6 Pay attention to the attachment point shown in the detailed drawing. Do not tighten the screws (13) yet. × × × 1.5 Nm × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 7 MOUNTING STEP · READ AND KEEP MOUNTING INSTRUCTIONS! Remove the original parts shown here from the vehicle. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 8 WARNING: Use a liquid threadlocker! Tighten the screws (15) according to the vehicle manufacturer’s specifications. × × × × The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 9 WARNING: before starting your journey, check that all components are firmly seated. Remove the connectors (9/10) from the vehicle when driving WITHOUT saddlebags. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 10 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 17 ~ 0.25 h. EASY DIFFICULT ENGLISH ·Thank you for choosing this premium product from SW-MOTECH. PREPARATION: Read the mounting instructions carefully and make sure Visit our online shop for more information (e.g. model assignments). Required that all parts on the parts list are available.
- Page 18 ASSEMBLY section, the vehicle manufacturer's our online shop: specifications must be observed and applied. www.sw-motech.com The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 19 PARTS LIST · READ AND KEEP MOUNTING INSTRUCTIONS! BC.HTA.00.740.003.02 The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 20 Thoroughly clean any grease and dirt residues from the determined adhesive positions. Remove the foils from the adhesive surfaces of the abrasion/edge protectors (1). The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 21 Check the correct positioning of the abrasion/edge protectors (1) again once the BLAZE saddlebags have been loaded. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
- Page 22 TÜV regulations. After assembly, have parts that are subject to registration entered in the vehicle documents by your test centre. The content translation is automated. Errors and omissions excepted © SW-MOTECH GmbH & Co. KG Subject to technical and design changes.
Need help?
Do you have a question about the HTA.01.740.85000/B and is the answer not in the manual?
Questions and answers