About these instructions About these instructions Target group These mounting instructions are intended for: – Engineers and architects charged with the planning of mounting sys- tems. – Electrically trained specialists charged with installing mounting sys- tems. Relevance of these instructions •...
– During mounting, take the structure of the wall and ceiling into ac- count. Personal protective equipment – During all mechanical mounting work, wear personal protective equip- ment: – Gloves – Eye protection – Head protection 6 | EN OBO Bettermann...
System description System description TP support systems for cable support structures are used for small loads. The systems comprise TP suspended supports and TP supports and wall and support brackets. The system components can be used for direct wall and ceiling mounting. System components Note! TP support/wall and support brackets and TP wall and ceiling clamps are...
The characteristic load values for the fastening anchors can be found in the appropriate tables and the approved load capacity of the individual system components in the appropriate load diagrams in the current cata- logue. https://obo-bettermann.com/en-wo/support/3804.html 8 | EN OBO Bettermann...
Mounting system components Mounting system components Danger due to high working height! When installing at height, there is a risk of falling and/or that parts may WARNING fall. Falls and/or falling components can cause serious injuries. - Do not work alone. - Use fall protection as required.
1. Screw the head reinforcement, spacer and TP suspended support together with a hexagonal bolt, washer and nut. 2. Place the mounted unit with spacers on the bolt thread and screw together with washers and nuts. 10 | EN OBO Bettermann...
Page 11
Mounting system components Fig 5: Mounting the suspended support with a double-sided bracket 3. Screw together the spacer and TP support/wall and support bracket, TP suspended support and TP support/wall and support bracket with washer and nut. 4. Attach the end caps. Mounting instructions, TP support systems EN | 11...
Fig 6: Mounting a TP wall and ceiling bracket 1. Place the spacer and TP wall and ceiling bracket on the bolt thread and screw together with a washer and nut. 2. Attach the end caps. 12 | EN OBO Bettermann...
Creating equipotential bonding Creating equipotential bonding Risk of electric shock! A lack of equipotential bonding can, in cases of damage, mean that parts WARNING of the mounting system may be energised. If contact creates a conductive connection, this can lead to fatal injuries. –...
Dismantling of all the elements of the mounting systems takes place in the reverse order to mounting. Disposing of mounting systems – Residual metal: As scrap metal – Packaging: As household waste Comply with the local waste disposal regulations. 14 | EN OBO Bettermann...
Technical data Designation Type Dimensions, mm Material Item no. TP wall and ceiling bracket TPD 145 FS 145 x 175 x 60 6363806 TP wall and ceiling bracket TPD 245 FS 245 x 175 x 60 6363814 TP wall and ceiling bracket...
Need help?
Do you have a question about the TPD 145 FS and is the answer not in the manual?
Questions and answers