Belkin F1DU120 - Pulse Network Monitor Quick Installation Manual page 6

To install Pulse, you will need the following:
Pulse 5V DC, 2.5A Ethernet Cable
Power Supply
Modem Cable Crossover USB-to-Ethernet
(optional) Cable Adapter (optional)
(optional)
Introduction
This Quick Installation Guide provides the steps you will need to
install your Belkin Pulse. Should you encounter a problem during this
installation, please visit www.belkin.com/pulse for more information.
Introduction | 1
5340ea_F1DUXXXea_QIG.indb 6 29/11/06 1:57:49 pm