Belkin F1DU120 - Pulse Network Monitor Quick Installation Manual page 14

Click on "Edit Network Settings" and change as needed.
Warning: Do NOT close your browser or unplug cables while the screen
displays the message, "PLEASE WAIT".
If you have connection problems, you can click "Test Network" to run
connectivity tests (ping, traceroute, or nslookup) from your Pulse.
If you still cannot get Pulse to connect, visit www.belkin.com/pulse for
troubleshooting tips and technical-support information.
5340ea_F1DUXXXea_QIG.indb 14
Step 3
Step 4
Examine or Change Network Settings/Diagnose Network | 9
Examine or change
network settings
Diagnose network
29/11/06 1:57:58 pm