Page 2
Please read this user manual first! Dear Customer, Thank you for choosing Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product.
Auxiliary Function Selection..28 Table of Contents 6.8.1 Auxiliary Functions..... 28 1 Safety Instructions......6.8.2 Functions/Programmes Selec- Intended Use........ted by Pressing the Function Safety of Children, Vulnerable Keys for 3 Seconds ....Persons and Pets ......End Time ........30 Electrical Safety......
1 Safety Instructions This section includes the safety • This appliance is intended to instructions necessary to pre- be used in household and sim- vent the risk of personal injury or ilar applications. For example; material damage. – Personnel kitchens of stores, Our company shall not be held offices and other work envir- responsible for damages that...
with, climb on top or inside the • Do not tuck the power cord un- product. Check inside the der the product or to the rear product before use. of the product. Do not put • Use child lock to prevent chil- heavy items on the power dren from intervening with the cord.
• Never connect your product to product for installation and electricity saving devices. Such make sure the electrical mains, systems are harmful to the clean water mains and water product. outlet are suitable. If not, call a qualified electrician and Handling Safety plumber to have them make the necessary arrangements.
Page 7
• Do not install the product at be minimum 0.1 MPa (1 bar) locations where the temperat- and maximum 1MPa (10 bars). ure drops below 0 ºC. 10 to 80 litres of water should • Do not place the product on a be running from the tap in a carpet or similar surface.
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
– Make sure the room where • Do not put hands, feet and the washing machine is metal objects under or behind placed is well ventilated. your product. This can cause jams, and any sharp edge can – Wipe the door gasket and cause personal injury.
in the machine cools down in order to avoid risk of getting burnt. 2 Important Instructions for Environment 2.1 Compliance with WEEE Directive This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE).
4 Installation 4.1 Appropriate Installation Location Please read the “Safety Instruc- tions” section first! • Place the product on a hard and level floor. Do not place it onto a carpet with Your washing machine automatic- high pile or other similar surfaces. Pla- ally detects the amount of laundry cing on an improper floor shall cause placed inside when selecting a pro-...
Cover A 3. Attach the plastic covers supplied in the User Manual bag into the holes on the rear panel. NOTICE Remove the transportation safety bolts before operating the product. Tilt the machine back slightly. Rest the tabs Otherwise, the product will get of Cover A against the lower panel.
vent the water leaks and resultant dam- of the hose into the waste water or do ages, keep the taps closed when you do not insert it into the drain for more than not use the product. 15 cm. If it is too long, cut it short. 5.
Adjustment of the Feet: • If the bubble inside the Water Level Indic- ator is on the rear, the front preset foot of the Washing Machine should be turned left (clockwise). • If the bubble inside the Water Level Indic- ator is on the front, the front preset foot of the Washing Machine should be turned right (counterclockwise).
ply the method which is described in sec- Some water has remained in the tion "Cleaning the loading door and the product due to the quality control drum". processes in the production. It is not harmful for the product. 5 Preliminary Preparation •...
5.4 Loading the Laundry 1. Open the loading door. 2. Put the laundry items into the product in a loose manner. 3. Push the loading door to close until you hear a locking sound. Ensure that no items are caught in the door. The load- ing door is locked while a programme is running.
Page 18
Choosing the Detergent type WARNING Detergent type to be used depends on the Do not use liquid detergents or washing programme, fabric type and col- other materials with cleaning prop- our. erties unless they are intended for • Use different detergents for coloured and use in washing machines for white laundry.
• Do not use softener and starch in the • As bleach may cause skin irritation use same washing programme simultan- only small amounts (1/2 tea cups - ap- eously. proximately 50 ml and rinse the laundry • Wipe the inside of the product with a well.
Powder and liquid deter- It may be necessary to gents recommended for pre-treat the stains or per- colours can be used at form prewash. dosages recommended Prefer liquid deter- Liquid detergents Powder and liquid deter- for heavily soiled gents produced suitable for colours gents recommended for clothes.
6.2 Symbols on the Display 1 Temperature Indicator 2 Spin Speed Indicator 3 Duration Information 4 Door Lock Is Engaged Symbol 5 Programme Follow-up Indicator 6 No Water Indicator 7 Delayed Start Enabled Indicator 8 Auxiliary Function Indicators 3 9 Auxiliary Function Indicators 2 10 Child Lock Enabled Symbol 11 Auxiliary Function Indicators 1 12 No Spin Indicator...
Page 24
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine The auxiliary functions in the table while selecting a programme. De- may vary according to the model of pending on the amount of laundry your machine.
6.4 Programme Selection programme stages may automatically get shorter. In this way, energy and water con- 1. Determine the programme suitable for sumption would be much less. the type, quantity and soiling level of the • Cottons laundry in accordance with "Programme You can wash your durable cotton laundry and consumption table".
• Spin+Drain • Xpress / Super Xpress You can use this program to remove the Use this programme to wash your lightly water on the garment/inside the machine. soiled or unspotted cotton clothes in a short time but not for towels or heavy cot- •...
• ColdWash 2. Select the stain you want to clean by locating it in the groups above and se- Use to wash your medium dirty and durable lecting the related group with the Quick/ cotton/synthetic laundry. Thanks to the Intense auxiliary function button. washing algorithm specially developed for the program, effective washing is ensured 3.
Whenever a new programme is selected, without spinning your laundry. Programme the recommended spin speed of the selec- will resume and complete after draining the ted programme is displayed on the Spin water. Speed indicator. It is possible that the re- If you want to spin the laundry held in wa- commended spin speed value is not the ter, adjust the Spin Speed and press Start/...
In case the FAST or INTENSIVE led is not lit, • Water Mode the appropriate programme duration is This auxiliary function key allows you to se- shown for your normally soiled clothes/ lect the additional functions of Water Sav- laundry. ing, Pre-Wash, and Extra Rinse or Extra wa- Depending on the programme selection, the ter depending on the model of your ma-...
A Prewash is only worthwhile for heavily Programme duration may differ soiled laundry. Not using the Prewash will from the values in section "Pro- save energy, water, detergent and time. gramme and consumption table" depending on the water pressure, • Child Lock water hardness and temperature, Use Child Lock function to prevent children ambient temperature, amount and...
1. Open the loading door, place the laundry and put detergent, etc. 2. Select the washing programme, temper- Opening the loading door in case of power ature, spin speed and, if required, the failure: auxiliary functions. 3. Set the End Time of your choice by In case of a power failure, you can pressing the End Time button.
6.12 Changing the Selections After The selected programme starts Programme has Started anew. Adding laundry after the programme has Changing the auxiliary function, speed and started: temperature: If the water level in the machine is suitable Depending on the step the programme has when you press Start/Pause button, the reached, you can cancel or activate the aux- door lock will be deactivated and the door...
7 Maintenance and Cleaning Please read the “Safety Instruc- Repeat Drum Cleaning process in tions” section first! every 2 months. NOTICE: Use an anti-limescale suit- able for the washing machines. Service life of your product extends and fre- quently experienced problems will be re- duced if it is cleaned at regular intervals.
filters prevent foreign substances and dirt NOTE: in the water to enter the product. Filters Foreign substances left in the should be cleaned if they are dirty. pump filter may damage your product or may cause noise prob- lem. If you live in areas prone to frost, re- member to turn off the water tap, disconnect the main hose, and drain the water from the product...
• When the water drain is finished, close • Clean any residues inside the filter as the end with the plug again and fix the well as fibres, if any, around the pump im- hose in its place. peller region. •...
Page 36
No water can be seen in the product during Programme duration does not countdown. washing. (On models with display) (*) • Water is inside the invisible part of the • Timer may stop during water intake. >>> product. >>> This is not a failure. Timer indicator will not countdown until the product takes in adequate amount of Loading door cannot be opened.
Page 37
• Washing has been made at low temperat- Washing performance is poor: Clothes ures for a long time. >>> Select the smell unpleasantly. (**) proper temperature for the laundry to be • Odours and bacteria layers are formed on washed. the drum as a result of continuous wash- •...
Page 38
• Detergent was put in the wrong compart- • Regular drum cleaning is not applied. >>> ment. >>> If detergent is put in the pre- Clean the drum regularly. For this proced- wash compartment although prewash ure, see Cleaning the Loading Door and cycle is not selected, the product can the Drum [} 33] take this detergent during rinsing or...
Therefore, please be advised that repairs product and subsequently cause fire, flood, by professional repairers (who are not au- electrocution and serious personal injury to thorized by Beko ) shall void the guaran- occur. tee. By way of example, but not limited to, the...
Page 40
ginal spare parts will be available to oper- ate the washing machine or washer-dryer properly. EN / 40...
Need help?
Do you have a question about the B3WBT691415W and is the answer not in the manual?
Questions and answers