Related Manuals for TOLSEN TOOLS 79527
Summary of Contents for TOLSEN TOOLS 79527
- Page 1 79527 ANGLE GRINDER INSTRUCTION MANUAL 1200W 220-230V~50Hz SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
-
Page 2: Important Safety Information
SAFETY IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings WARNING: read all safety warnings and instructions.Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term ”power tool” in the warnings refers to your mains-operated (corded) power tool. 1. - Page 3 SAFETY 13. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. 14.
- Page 4 SAFETY Safety Warnings Common for Grinding, Sanding or Wire Brushing Operations 1. This power tool is intended to function as a grinder, sander or wire brush. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury.
- Page 5 SAFETY 17. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Tolsen Tools for a replacement. 18. Avoid unintentional starting. Prepare to begin work before turning on the tool. 19. Do not depress the spindle lock when starting or during operation.
-
Page 6: Specifications
SPECIFICATIONS AND SETUP SPECIFICATIONS Electrical rating 220-230 V~50Hz Rated power 1200W Motor no load speed 3000-11500/min Max.accessory diameter 125mm (Sold separately) Max.accessory thickness Arbor hole diameter 22.2mm Spindle thread SETUP - BEFORE USE Read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 7 SETUP FUNCTIONS Spindle lock Whell guard bolt Locking switch Air window Switch Auxiliary handle Wheel guard...
- Page 8 SETUP OPERATING INSTRUCTIONS Tool Set up WARNING! To prevent serious injury from accidental operation: turn the power switch of the tool off and unplug the tool from its electrical outlet before installing accessories. Installing a Non-threaded Grinding Wheel 1.The Grinding Wheel (sold separately) MUST be: •...
- Page 9 SETUP General Operating Instructions WARNING! to prevent serious injury: grip the tool firmly in both hands. 1. Make sure that the switch is not locked on, then plug in the tool. 2. Press down on the switch to release the safety. 3.
-
Page 10: Maintenance And Servicing
MAINTENANCE AND SERVICING WARNING! to prevent serious injury from accidental operation: turn the power switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from tool failure: do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use. -
Page 11: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Problem Possible causes Likely Solutions Tool will 1. Cord not connected. 1. Check that cord is plugged in. not start. 2. Check power at outlet. If outlet is unpowered, 2. No power at outlet. turn off tool and check circuit breaker. If 3. -
Page 12: Ce Declaration Of Conformity
CE DECLARATION OF CONFORMITY SUZHOU TOLSEN TOOLS CO.,LTD. 198 HUASHAN ROAD, ZHANGJIAGANG, JIANGSU, CHINA Declare that the product 79527 Angle Grinder(AT3113X-125) 220-230V~, 50Hz, n: 3000-11500/min, Class II Serial number: N/A Complies with the essential health and safety requirements of the following Directices: EC Machinery Directive 2006/42/EC Standards and technical specifications referred to:... - Page 13 SUZHOU TOLSEN TOOLS CO.,LTD. www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. SCAN TO VISIT TolsenWorld MADE IN CHINA PRODUCT LINK...
Need help?
Do you have a question about the 79527 and is the answer not in the manual?
Questions and answers