Table of Contents
Related Manuals for TOLSEN TOOLS 79543
Summary of Contents for TOLSEN TOOLS 79543
- Page 1 79543 ANGLE GRINDER INSTRUCTION MANUAL 760W 230V~50Hz SAVE THIS MANUAL ! You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
-
Page 2: Important Safety Information
SAFETY IMPORTANT SAFETY INFORMATION General Power Tool Safety Warnings WARNING: read all safety warnings and instructions.Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.Save all warnings and instructions for future reference.The term ”power tool” in the warnings refers to your mains-operated (corded) power tool. 1. - Page 3 SAFETY 13. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the switch or energizing power tools that have the switch on invites accidents. 14.
-
Page 4: Safety Warnings Common For Grinding, Sanding Or Wire Brushing Operations
SAFETY Safety Warnings Common for Grinding, Sanding or Wire Brushing Operations 1. This power tool is intended to function as a grinder, sander or wire brush. Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. -
Page 5: Safety Warnings Specific For Grinding Operations
SAFETY 17. Maintain labels and nameplates on the tool. These carry important safety information. If unreadable or missing, contact Tolsen Tools for a replacement. 18. Avoid unintentional starting. Prepare to begin work before turning on the tool. 19. Do not depress the spindle lock when starting or during operation. -
Page 6: Specifications
SPECIFICATIONS AND SETUP SPECIFICATIONS Electrical rating 230 V ~50Hz Rated power 760W Motor no load speed 11000/min Max.accessory diameter 115mm (Sold separately) Max.accessory thickness Arbor hole diameter 22.2mm Spindle thread SETUP - BEFORE USE Read the entire important safety information section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 7 SETUP OPERATING INSTRUCTIONS Tool Set up WARNING! To prevent serious injury from accidental operation: turn the power switch of the tool off and unplug the tool from its electrical outlet before installing accessories. Installing a Non-threaded Grinding Wheel 1.The Grinding Wheel (sold separately) MUST be: •...
-
Page 8: Maintenance And Servicing
MAINTENANCE AND SERVICING WARNING! to prevent serious injury from accidental operation: turn the power switch of the tool off and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures. To prevent serious injury from tool failure: do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use. -
Page 9: Troubleshooting
TROUBLESHOOTING TROUBLESHOOTING Problem Possible causes Likely Solutions Tool will 1. Cord not connected. 1. Check that cord is plugged in. 2. Check power at outlet. If outlet is unpowered, not start. 2. No power at outlet. turn off tool and check circuit breaker. If 3. - Page 10 SUZHOU TOLSEN TOOLS CO.,LTD. www.tolsentools.com TOLSEN is a trademark or registered trademark of TOLSEN TOOLS. All rights reserved. TolsenWorld SCAN TO VISIT MADE IN CHINA PRODUCT LINK...
Need help?
Do you have a question about the 79543 and is the answer not in the manual?
Questions and answers