Icom IC-40G Instruction Manual page 16

al
or
D SCAN OPERATION
Ha LOCKOUT CHANNEL
Unwanied memory channels can. be skipped during ihe
memory scan operation. The lockout channel function is
only available in the memory scan operation.
@ Push [MEMO] to select MEMORY mode.
o "MEMO" appears.
Select a memory channel to be locked out.
While pushing [FUNCTION], push [MEMO] (L-OUD.
ə "LOCK" appears.
®
To cancel, repeat siep 3.
m RESUME CONDITION (Scan Siop Timer)
The resume conditions of scan and dual watch can be
changed.
(D To change the condition, while pushing [FUNCTION], push
110CH] (SST) downwards.
> "St" appears, then blinks.
@ Push [1CH] upwards or downwards to set the resume
condition ON or OFF.
($ Repeat step 1 to return to previous mode.
The scan resume condition and the dual waich resume
condition cannot be set separately.
»LOCXOUT CHANNEL
2n
3 3
f
Memory channel
. | FUNCTION |
RESUME CONDITION — On condition:
Scan cr dual watch pauses
for 15 sec.
FUNCTION
econ
Ss
DIAL or "m
MEMORY mode
|
7| AP
OFF condition:
Scan or duai watch pauses
until a signal disappsars.