Sony SSC-C104 Operating Instructions

SONY
3-810-845-11 (1)
S'Olor Video Camera
Operating Instructions
Before operating the unit, please read these instructions
thoroughly and retain them for future reference.
Mode d'emploi
Avant la mise en service de cet appareil, priere de lire
attentivement ce mode d'emploi que Ton conservera pour toute
reference ulterieure.
Manual de instrucciones
Antes de utilizar la unidad, lea detenidamente este manual, y
conserveio para futuras referencias.
SSC-C104/Cl 08P
Sony Corporation ©
1996 Printed in Japan
owner's Record
The model and serial numbers are located on the bottom.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your Sony dealer
regarding this product.
Model No.._ Serial No._
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the cabi¬
net. Refer servicing to qualified personnel only.
NOTICE FOR THE SSC-C104
The graphical symbols are on the unit SSC C104.
/tfy This symbol is intended to alert the user to the
/ I \ presence of important operating and maintenance
/ • \ (servicing) instructions in the literature accompanying
L
-1-a the appliance.
__✓ r the customers in the USA (SSC-C104 only)
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interfer¬
ence to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
English
This manual applies to both the SSC-C104 and SSC-C108P. The
operating instructions apply to both cameras, but their signal systems
and power requirements are different.
Signal system Power requirements
SSC-C104 NTSC color system
24V AC, 60 Hz
SSC-C108P PAL color system
220-240V AC, 50 Hz
Features
• High sensitivity
• Backlight compensation
• Turbo AGC
• CCD-IRIS function
• Compact and lightweight
• Line lock function
• C/CS mount capability
• DC/VS servo Auto-iris lens capability
• Automatic Tracing White Balance
Notes on Use
Power supply
• The SSC-C104 must always be operated with a 24V AC, 60 Hz Class
2 power supply.
In the U.S.A, use a power supply which is UL Listed. In Canada, use a
power supply which is CSA Certified.
-When connecting the transformer, be sure to connect each lead to
the appropriate terminal. Wrong connection may cause malfunction
and/or damage to the video camera.
-Ground the unit or an irregular voltage may be generated in the AC
power cord and may cause malfunction and/or damage to the video
camera.
• The SSC-C108P must always be operated with a 220-240V AC, 50 Hz.
Handling of the unit
Be careful not to spill water or other liquids on the unit, or allow
combustible or metallic materials inside the body. If used with foreign
matter inside, the camera may fail, or be a cause of fire or electric
shock.
Operating and storage locations
Avoid shooting very bright objects (such as light fittings) for an extended
period. Avoid operating or storing the unit in the following locations:
• Extremely hot or cold places (operating temperature -10°C to 50°C
(14°F to 122°F), storage temperature -40°C to 60CC (-40°F to 140°F)
• Damp or dusty places
• Where it is exposed to rain
• Locations subject to strong vibration
• Close to generators of powerful electromagnetic radiation such as
radio or TV transmitters.
Care of the unit
• Use a blower to remove dust or dirt on the surface of the lens or
optical filter.
• Clean the body with a dry soft cloth. If it is very dirty, use a cloth
dampened with a small quantity of neutral detergent, then wipe dry.
Avoid the use of volatile solvents such as thinners, alcohol, benzene,
and insecticides. They may damage the surface finish, or impair the
operation of the camera.
In the event of any problems with the operation of the camera, contact
your authorized Sony dealer.
Location and Function of Parts
Front and side
Illustration □
O
C/CS adjustment ring
The C/CS ring to adjusts the back focus to suit the type of lens fitted
(C-mount or CS-mount). The factory setting is set to C*mount. After
adjusting, be sure to lock the back focus with the
0
LOCK screw.
0 Camera mounting plate (C104-Top/C108P-Bottom)
The camera mounting plate can be attached to either the top or bottom
of the camera using the 4 attached screws. Use the mounting plate
screw hole to fix the camera to a mounting bracket. The mounting
screw must be of the following type.
1/4" UNC (20 pitch)
£'- / C m C\ O m m / I O /'♦nrvrf ^