Glide Gear TMP50 User Manual

1
PRIOR TO USING THE TMP50, you will need to install a teleprompter application on your cell phone
or tablet.
WARNING: Please note that the application must allow mirroring of text to be used with the TMP50.
WARNING: The TMP50 does not come with an application for cell phone or tablet.
The TMP50 can be set on a flat surface or mounted on-
2
to a tripod.
When using a tripod, remove the cheese-plate from
the tripod head and screw it onto one of the 2
mounting holes at the bottom of the TMP50(Fig. A).
Unlock the pins on both sides of the frame so that
3
the frame can move (Fig. B).
Rotate the frame towards the back of the
4
TMP50 (Fig. B).
Set the frame in a
5
the screws from
(Fig. C).
CHECK POINT
Your TMP50 should now look like in Fig C.
For more information please visit our website: www.glidegear.net
TMP50
45-degree angle and use
to lock it into position
3
2
Fig. A
4
3
Fig. B
5
Fig C.