Summary of Contents for Glide Gear SB 3x6-Isolation Booth
Page 1
SB 3x6—Isolation Booth USER MANUAL For more information please visit our website: www.glidegear.net...
Page 2
What is in the box Frame (A) x2 Connecting Poles (B) x2 Hooks (C) x23 USB Light (F) x2 Friction Arm (G) x2 Speaker Stand 1/4-20 adapter and Mic stand adapter (I) x2 Adapter (H) x2 Top Cover (E) Main Blanket (D) For more information please visit our website: www.glidegear.net...
Page 3
Assembly STEP 1: Place each Frame (A) center pole on top of a C-Stand as pic- tured in Fig 1. Fig. 1 WARNING: You need 2 C-stand to mount the SB 3x6. The C-stands are not included with the SB 3x6 Fig.
Page 4
Assembly STEP 3: Using the supplied hooks (C) , attach the Main Blanket (D) to the Frame (A). Make sure to line up the Blanket’s seams with the corners of the frames as pictured in Fig. 3. Fig. 4 Fig. 3 STEP 4: While attaching the Blanket (D), wrap the Blanket around the C-Stands so that the stands are inside the booth...
Page 5
Assembly STEP 6: Raise the C-Stands so the Main Blanket does not touch the ground. PLEASE NOTE that the windows on the front of the booth can be held open using Velcro straps at the top of the Main Blanket Fig.
Page 6
Alternative Setup The SB 3x6 can also be put together using 2 speaker stands. 2 adapters for speaker stands (F) are includ- ed with the SB 3x6. To mount the SB 3x6 on speaker stands, replace STEP 1 with the steps below. STEP 1-B: Slide the Frame (A) center pole onto the Speaker Stand adapter.
Need help?
Do you have a question about the SB 3x6-Isolation Booth and is the answer not in the manual?
Questions and answers