Table of Contents
Advertisement
Quick Links
Requirements
In order to use the TMP 750, you will need the following items, which are not in-
cluded with the TMP 750:
A video recording device such as a DSLR or a Mirrorless camera, a tablet
•
or a smartphone. The TMP 750 does not come with a phone or a tablet
mount/adapter.
A device, typically, a tablet or a cellphone, displaying the script to be read
•
in front of the camera. The device will need to be equipped with a tele-
prompting application or software allowing mirroring of text.
A tripod capable of supporting the weight of the entire setup.
•
Compatibility
DSLR/Mirrorless Cameras: the distance between the mounting hole at the
•
bottom of the camera and the front of the lens should not exceed 12" or
30cm
Tablet/Cell phone: the maximum display the TMP 750 will accommodate
•
without part of the screen not being cut off is 11.5"x 9" or 29cm x 22cm
App Download
For more information please visit our website: www.glidegear.net
TMP 750
Download a free or a paid version of a tele-
prompter in the app store of your tablet or cell-
phone. The app must be able to mirror the script
in order to function properly with the TMP 750.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Glide Gear TMP 750
Summary of Contents for Glide Gear TMP 750
- Page 1 TMP 750 Requirements In order to use the TMP 750, you will need the following items, which are not in- cluded with the TMP 750: A video recording device such as a DSLR or a Mirrorless camera, a tablet •...
- Page 2 CONTENTS Beam Splitter Camera Plate Vertical Guiding Plate (x2) Accessory Clamp 15mm Rail (long) 15mm Rail (Short) Beam Splitter positioning Tablet Clamp Tripod Plate clamp NOTE: The Beam Splitter Hood is not displayed in this schematic. For more information please visit our website: www.glidegear.net...
- Page 3 ASSEMBLY The TMP 750 must be mounted on a tripod. Remove the cheese plate from the tripod head and screw it onto one of the 2 mounting holes at the bottom of the Tripod Plate. Slide the Long Rails through the Tripod Plate.
- Page 4 ASSEMBLY Using the 2 thumb screws on the sides of the Beam Splitter, set the an- gle between the Beam Splitter and the Long Rails to a 45-degree angle. Your setup should look like the figure on the right. Adjust Beam Splitter Angle Mount the camera onto the Camera Plate.
Need help?
Do you have a question about the TMP 750 and is the answer not in the manual?
Questions and answers