HOMCOM 820-281V70 Manual page 5

EN
Usage
The display temperature mode can be switched :
•
ln standby mode, the Temp and ON/OFF keys are held down for three seconds to
•
switch between Degrees Fahrenheit and Degrees Celsius
peration chart
Electronic operation
display screen
Air outlet
Function Introduction
1. The use of electronic type
A. When plugged in, turn on the power switch on the back of the
product, After hearing the "beep" sound, the digital screen displays
the ambient temperature, and the product is in standby state at this
time.
B. ON/OFF: The first press will show blue Low, the second press will
show red High, and the third press will turn off the product.
C. Press the swing button to rotate or stop the product.
D. Timer:1-24Hour
E. Temp: set the temperature to 59-104 Fahrenheit degrees (15-40
Celsius temperature).In this working state, press the ON/OFF to
cancel the temperature setting.
The product shuts down automatically when the ambient
temperature exceeds 122 Fahrenheit degree (50 Celsius
temperature).
F. At the same time, long press the temperature button and the timer
button for 3 seconds, It can be unlock or lock.
G. Long press the swing to rest the screen, turn off the light, and press
any key to wake up.
H. Please remove the protective film before using the remote control.
Please plug the diaphragm if it is not used for a long time.
4
Mechanical knob
(Don't need this knob for
electronic models)
Air intake
Blue light:low
Red light:High