custom alarm DMP 8860 Quick Reference Manual

DMP 8860
Arm
1. Tap the shield icon in the center of the screen.
2. Select "Arm" on the left side of the screen.
3. Enter your 4-digit user code.
4. Tap "CMD" in the bottom right corner.
5. To Arm all areas, tap "Arm All". To selectively arm areas, select the
desired areas, then tap "Arm Selected."
6. The Exit Timer will display on the keypad, exit the building. If you need
to cancel arming, tap the "Enter Code to Cancel" box, enter your
4-digit code then "CMD".
Disarm
*If entering an Armed building/area and the entry delay is in progress, skip to step 3.
1. Tap the shield icon in the center of the screen.
2. Select "Disarm".
3. Enter your 4-digit user code then "CMD".
4. To Disarm all areas, tap "Disarm All". To selectively disarm areas, select
the desired areas, then tap "Disarm Selected."
Clearing an Alarm
1. Enter your 4-digit user code then "CMD".
2. Screen will ask, "False Alarm?" — Select "Yes".
3. From the Home Screen, select the Triangle at the top of the screen to
display alarms. If there are no further issues with the system, tap the
arrow at the bottom to close the menu.
4. If there is still an alarm message displaying, follow steps for Disarming.
Quick Reference Guide