custom alarm Vista Quick Reference Manual

Disarm

Enter 4 digit code + 1 (Disarm)

Arm Stay

(No Motion Sensors)
Enter 4 digit code + 3 (Stay)
(if 'Quick Arm' is enabled, press # + 3)

Arm Night

(No Motion, No Door Delay)
Enter 4 digit code +7 (Instant)
(if 'Quick Arm' is enabled, press # + 7)

Arm Away

(Motion Sensors On)
Enter 4 digit code +2 (Away)
(if 'Quick Arm' is enabled, press # + 2)

Check System Status

*
Press to show if any sensors are currently open or in trouble.

Clearing an Alarm

Enter 4 digit code + 1 (Disarm) once to silence, then repeat 4 digit code + 1
(Disarm) to clear alarm and disarm fully.

Bypass a Problem Zone

• Know which Sensor (zone) is having the issue. Press
scroll any troubled/opened zone names, along with a 2 digit number for it.
• You will need to do this command sequence once per zone number if
there are multiple sensors being bypassed.
• Once you have found your problem zone number(s), type your 4 digit code
+ 6 (BYPASS) + Zone number (03, 09, 15, 22, etc.)
• Once all open/troubled zones are bypassed, the system can be armed as
normal. The bypasses will clear upon the next disarm, and will need to be
re-bypassed when attempting to arm again.

Enable Door Chime

Enter 4 digit code + 9 (Chime) - The display will indicate whether the
chime is on or off. Repeat the command to switch between On/Off.
Quick Reference Guide
Vista
(Keypad beeps when door opens)
*
and the display will