UNI-T UTi384H Manual

PREFACE
Thank you for purchasing the new UTi384H thermal imager. In order to use this product
safely and correctly, please read this manual thoroughly, especially the Cautions part.
After reading this manual, it is recommended to keep the manual at an easily accessible
place, preferably close to the device, for future reference.
LIMITED WARRANTY AND LIABILITY
Uni-Trend guarantees that the product is free from any defect in material and workmanship
within one year from the purchase date. This warranty does not apply to damages caused
by accident, negligence, misuse, modification, contamination and improper handling. The
dealer shall not be entitled to give any other warranty on behalf of Uni-T rend. If you need
warranty service within the warranty period, please contact your seller directly.
This warranty is the only compensation you can obtain. Uni-T rend will not be responsible
for any special, indirect, incidental or subsequent damage or loss caused by any reason
or speculation. As some areas or countries do not allow limitations on implied warranties
and incidental or subsequent damage, the above limitation of liability and stipulation may
not apply to you.
CAUTIONS
1. Use or store the product at specified operating or storage temperatures. Otherwise, the
device may be damaged.
2. Do not directly aim the product at high-intensity thermal radiation sources, such as the
sun, laser device, spot-welder, etc.
3. Do not knock, toss, or shake the product and accessories.
4. Do not place the battery in a high temperature environment or near high temperature
objects. Do not short-circuit the positive and negative electrodes of the battery . Do not
place the battery in a humid environment or water.
5. Do not expose the device to dusty or damp environment. When used in an environment
with water, avoid water splashing on the product.
6. Do not use dissolved or similar liquids on the product or cables, as it may cause device
damage.
7. Please follow the following instructions when wiping the device:
Non-optical surface: If necessary, use a clean and soft cloth to wipe the non-optical
surface of the thermal imager.
Optical surface: Do not stain the optical surface of the lens when using the thermal imager.
Be especially careful not to touch the lens with hands, as sweat from hands will leave
marks on the lens glass and may erode the optical coating layer on the glass surface.
When the optical surface is stained, carefully wipe it with a special lens paper.
8. When using the device, please try to keep it stable and avoid violent shaking.
9. Please close the lens cover and put the product and its accessories into the carrying
box when it is not used.
10. Please do not disassemble the device to avoid product damage and loss of warranty
rights.
11. Due to different batches, the materials and details of actual products may be slightly
different from the graphic information. Please refer to the goods received.
12. The experimental data in the manual are theoretical values and all from Uni-Trend's
internal laboratories, for reference only. Customers cannot use them as bases for
placing orders. If users have any questions, please contact customer service.
16